They know about this bugOriginally Posted by jerry2
Personally I rarely reboot. Mines left in standby when not used.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
[QUOTE=hizach;168074]correct.
Vu+ are a south Korean company
GigaBlue are a German company.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Same here, but when I am trying a lot of things I have to reboot often and if something freezes also. I can not tell my wife if it freezes to change from 1080p to 720p and back ;-)))They know about this bug
Personally I rarely reboot. Mines left in standby when not used.
Hi,
does anybody have >=2 quads at home? I just read in a German board that a user has 2 quads and both have the same MAC which is a no go IMHO. With only 1 MAC for >=2 boxes it is not easy to work in a network.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
Can you not change the MAC?
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
@Trial
This should not happen. When the chips are made, they should be using specific mac addresses, which, altho they can re-use the address, there will btw plenty of different combos. But, there is a possibility that a duplicate was made. But wouldn't think it would be every box, surely?!
@Marty
I know in e1 days, you could change the mac by using a kind of start up, which changed it as soon as the box started. But, the actual address is 'burnt' in to the chip by manufacturer, do cannot change mac on hardware side of things...
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
Hi,
the MAC problem is fixable in the BIOS with a tool named macprog2. At least that is what I read. Nevertheless it should not happen.
@pooface,
I only know a guy with 2 boxes and his had the same MAC that“s why I ask.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
Any info when they will add usb tuners support or when they will upgrade the kernel?
[QUOTE=pheonix;168076]I think this is more like "assembled in Germany" at best, which allows "Made in Germany" somewhat like Clarke Tech - 99% of the components I would expect to come from China or South Korea, apart from the top German outfits, Medion is the only other company in Germany that would have the capability to actually source and build this box --------but I have been wrong before & will be again
I used to work for Bosch-Rexroth in Ireland, everything we made there was stamped "Made in Germany"
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
Mr. Mister (30-10-12)
Hi, the Quad is on my list as I need a new receiver. I currently have a Dreambox 500S and it's time to buy a HD receiver with PVR. Unbelievable I know! But I'm waiting for the small issues to be ironed out and to see the price of the Vu+ Duo2. I want a dual-tuner PVR with mediaplayer functions (Avi, Divx, Xvid, MP4 & MKV) and I'm just wondering, can the Quad do airplay as mentioned on the VU+ website for the Duo2? Does the Dreambox Live app for iPad streaming work on the Quad?...errr...as mentioned on the VU+ website for the Duo2 (VU+ Player) : ) And finally, can I remotely control the Quad ie...set a recording away from home, or change the channel while my wife is watching TV to annoy her, brave I know!
Many thanks and sorry for the silly questions!!! I'm pretty new to this!
streaming to ipad - what's called "airplayer" - is something all these enigma2 receivers are capable of. just need the app/software on the iOS or android device. as for "airplay" - then you can currently do that on the duo but with limited functionality. Again, i think all enigma2 bixes might have potential with it, as it's reated to the plugin used.
i don't know if the duo2 will have any additional hardware to support such airplay functionality (like an apple tv). if it does it would be something special. however i doubt it, i would think it's just your basic enigma2 stuff, but because of the extra processing power, it has potential of running much smoother and being stable. but that's just my guess.
superfly (31-10-12)
I got mine on my way !! !!!
can't wait!
Anyone have a photo they can take of the Made In Germany stamp on the receiver?
I'm not sure if the receiver is manufactured in Germany but the company GigaBlue them selves are a German Company.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Mr. Mister (30-10-12)
Posting Permissions
Reply With Quote
