sat 16 e eutelsat
some service not work
10803 h 27500 6/4 dvb-s
my image vti 3.2
try scan this several times but not work why ?
lease need help
sat 16 e eutelsat
some service not work
10803 h 27500 6/4 dvb-s
my image vti 3.2
try scan this several times but not work why ?
lease need help
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
i think that i need to update the drivers of tuner (vu+ solo) because i found ( tuner error ) in some service of defrance sat when i go to channles !
after change the channel and return again to last channel it open and the error gone !!
if can update drivers tuner how can i make it ?
If your using the ViX 2.3 / 2.4 image or any image released in the last 3 and a half months you already have the latest hardware drivers in your image
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
my image is : vti v 3.2 solo --- date 11-10-2011 last vti image
i dont knew if the image inclode the drivers or the drivers install alone ?
In that case no you do not have the latest hardware drivers in your image, also be aware that due to the date of that image i'm assuming it is the older Linux kernel 2.6.18 version so the latest drivers will not work as they are only for Linux kernel 3.1.1 based images.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
how can i inter this 10803.75 to scan ?
menu>setup>service searching>manual scan
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information here on my posts are hypothetical in nature, out of curiosity, common knowledge, public knowledge, or role-play. Use of the collective descriptions and knowledge from any of my posts are at YOUR discretion
I am not responsible for what you do with it
Want to know about cardsharing see Here
Want clone support see Here
PM HELP WILL BE IGNORED PLEASE POST IN FORUM AS IT BENEFITS EVERYONE
If you have had a problem that you started a thread about and found your own solution please post back to let everyone know how you solved it
yes i know that but i main the size box which inter no. ( 10803.75) the size of box = 5 nomber (10803) i ask how inter the full no. ( 10803.75 ) in the box !
and please i need last ver. of ( vti vu+ solo image )
you do not need to enter the last two digits of the frequency the receiver will round them up it self, you however were entering the wrong FEC: details, you were entering 6/4 when the correct value should be 3/4.
as for the VTI 4.1 image i am currently unable to upload it due to severely limited bandwidth but if you google it you will no doubt find a link ( thats what i did ).
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
oki
but i ask why the division of downlaod vti solo image not update to last one
the vti solo v 3.2 scince 10-2011 still found but ver 4 , 4.1 not fix ?
i depend on it i hope up to date
I think there is a little language barrier problem here so i'm not really sure what you mean i'll try to answer though.
if you were asking why the VTI 4.1 image for the solo is not uploaded to this forum thats just because no one uploaded it here, there is nothing untoward just no one got around to it.
if you were asking about why you can not use the new drivers in the VTI 3.2 image i explained earlier that there are currently two different Linux kernels for these receivers, Images using the older 2.6.18 kernel are no longer updated either by their teams or by the manufacturer in the forum of hardware drivers. only the newer images with the 3.1.1 linux kernel ( generally images released after december 2011 ) can use the latest hardware drivers as they are built for the 3.1.1 linux kernel specifically.
I hope that helps you understand a little better.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
yes i understanded
that the new image included the new drivers .. is it right ?
i try flash vti vu solo 4.1 but not work i think that for vu+ ulimo
hlep me to find last ver. vti vu+ solo image