just installed iQ-DW mod 2011-11-28
have set service searching too usals and entered the positions correct but now i get no channels on 28.2e
and all other sats channels are greyed out
what has gone wrong ?>
thanks dan
just installed iQ-DW mod 2011-11-28
have set service searching too usals and entered the positions correct but now i get no channels on 28.2e
and all other sats channels are greyed out
what has gone wrong ?>
thanks dan
Sounds like your sat xml file is corrupt, or your tuner needs resetting up to allow the various sats thst you can watch
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
was working fine before the new image though ,, all sats were fine and all channels were showing ,, have just updated the sat.xml file and have updated all channel via dreamboxedit
right i didnt have the right position in the set up for usals
i can now get 28.2e channels but nothing on other sats
how can i get other sat to work ?
the iimage was set up for 28.2e so how can i change it for multi sat ? ?
thanks dan
the other sat channels are all greyed out !
Last edited by dan44762000; 30-04-12 at 18:26.
did you reboot the unit?? ie power down, then restart?
also check your tuner settings,
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
not that up with the workings of the TM800, but most of your problems should be fairly common to any sat unit
if 28 east is now working, it surgest to me, that your tuner setting is set to single sat, ( 28 east )
and perhaps needs setting to many sats, or motorized
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams