My VU+Solo won't boot.... Only Red LED...

[snabbast]

Hi !

Ive tested to update my vu+ like always on the menu, but this time it would not start at all.
I tested to reinstall my image Open Pli 2.1 and it did start again, then the same thing when I tested to update, dead....

Then I have seen that i must update new bootloader and did that, then I try to take a newer Open Pli from 20120102 and then it want start att all. Know I cannot reeinstall at all. Only red LED on the front.

Help me! Anyone maybe knows how to do? I have dreambox too but there i´ve Dreamup to fix the dreambox but now i don´t know how to do.

Really need som help here.

Regards
Snabbast

[Sicilian]

Have you flashed the latest bootloader from here http://www.world-of-satellite.com/at...9&d=1324299803

[snabbast]

Yes i have! But know i can´t flash anything... Nothing happening now... only red LED...

[Sicilian]

Is the bootloader detected and does it appear to flash?

[snabbast]

No! Nothing is happening... only red LED. It´s not taking anything from USB stick.. only red LED.

[Rob van der Does]

You have the box powered off > 30 seconds?

[snabbast]

I had the box power off all the night.... 8 hours and same problem.

[Donnie]

You can check the bootloader using hyperterminal and null modem cable.

How To:
1. Switch your box off
2. Connect your box to PC via serial null modem cable
3. Open Hyperterminal and make connection to the serial port with 115200 bits per second
4. turn on your box and check the output.

[snabbast]

Donnie: I connect my box via serial port with 115200 but when i´m turn on my box nothing happens... How and where will I see the output?

[Sicilian]

Donnie: I connect my box via serial port with 115200 but when i´m turn on my box nothing happens... How and where will I see the output?

You need to connect with hyperterminal using putty.

[snabbast]

Can anyone help me with that?

[Donnie]

Donnie: I connect my box via serial port with 115200 but when i´m turn on my box nothing happens... How and where will I see the output?

Having read your post on another board it would appear you have killed the box by loading the CFE for the Duo and not the Solo.
All you can do is hope VU release a fix for all the users that have managed to do this.

[snabbast]

Ok! Thats not good. When i´ve done anything like that on a Dreambox then I can use dreamup to fix a dead dreambox with RS232 null moden kabel and it should fix even a VU+ I think. But it seems that VU util i tested not working. Have tested even VU util2.01. Any idees here?

[pooface]

Ok! Thats not good. When i´ve done anything like that on a Dreambox then I can use dreamup to fix a dead dreambox with RS232 null moden kabel and it should fix even a VU+ I think. But it seems that VU util i tested not working. Have tested even VU util2.01. Any idees here?

Vu util never worked on solo from what I remember. Have you tried contacting vu themselves, and see if they can offer any guidance...

Sent with Tapatalk

[snabbast]

Yes Pooface, I mailed them yesterday but no answer yet.