yeah mate pm me yr addy and you will get a gift to remeber me by foreverOriginally Posted by drspiros
i reckon silverfox the name will be sinonimous after you see what i ya
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓
What are you talking about? First, I haven't spoken about et9000 but about et5000, second the receiver is not connected to a TV but to a projector. After all, I don't care what you think, I've done what I've been asked for and that's all, if you don't agree, don't take the risk! But stop bullshit!
P.S. I have only tried to help the guy with the dead receiver, I never told to anybody with a working receiver to do anything! I don't know how I was trapped to explain these procedures to you people, but I really don't care if you want to update or not. After all, I think upgrading is not really necessary if your receiver is OK. It's your business, it's totally indifferent to me!
Last edited by drspiros; 16-11-11 at 22:29.
rite this thread is slowly but surely going no where, so i am going to ask that people calm down otherwise i am going to lock and dump the whole thread.What are you talking about? First, I haven't spoken about et9000 but about et5000, second the receiver is not connected to a TV but to a projector. After all, I don't care what you think, I've done what I've been asked for and that's all, if you don't agree, don't take the risk! But stop bullshit!
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
drspiros (16-11-11)
Well I've tried again on a ET9000, same thing, old image does not flash correctly and receiver stops booting until a new correct image is flashed. I'm look at your video again later.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
I repeat for another time that my receiver is an et5000 model, not an et9000 one. May be this is an important difference.
basilyoung (18-11-11)
I've tried this on my ET5000 and it realy works. Just rename the folder in to ET5x00 and delete the boot.bin file. Start the tuner. Press first the middle button and press then the up button.
back on topic of the thread......
box was sent back and new motherboard and security board fitted.
working again now.
site sponsor was superb - would recommend
yeah he's a really nice bloke and always goes out of his way to help.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Posting Permissions
Reply With Quote
