VU+ UNO help needed please

[norhap]

as I can get my data DTT channel?

with automatic search of my DTT, when I give information service key (MENU button) get this:

Inversion: Auto
Auto Transmission Mode.
Guard Interval: Auto
Transponder Type: Land
Bandwidth, 8 MHz
Coderate LP: Auto
Frequency: 610000000
Auto Information Hierarchy
Constellation: Auto
Coderate HP: Auto



these are the data I need are the DTT channel data:

SID: service
TSID: Transponder
ONID: Red

Well, what I want is to get Freeview channel data with the image after getting ViX pass hexadecimal data, so try to import my DTT (SAT) and take my tuner EPG DTT. and see the EPG, I need to know how to obtain these from the DTT channel intending to import:

is possible to obtain such information with ViX?

I want to do automatic, meaning that the EPG is loaded alone (DTT), without having to give the yellow button and then MENU -> "import from the EPG." for that I have to set the lines in the script mhw2epgdowloader.conf.


avail easiest way to do this?

[norhap]

I have it running, the provider I use is the mhw2 (spain).

I have only to add a copy to replace the line configuration


This is the line you use, eg for channel TVE1:

SAT line to copy -> DTT

channel copy = 77c0:40a:1:TVE 1 -> 1cc:3ed:22d4:TVE 1 DTT

how complicated the data has been searching in my area,
SID: Service
TSID: Transponder
ONID: Red

but I automatically loads the epg in DTT tuner Hauppage USB mini stick

[DeGea468]

Hello

I have a problem.. all of a sudden i'm getting "Tuner Failed"

I have done a restart but still not working.

I came across a different thread when doing a search and it mentions making sure settings are up to date.

I'm using 'ViX Team Enigma 2 HD settings for 28.2E' usually it gets updated every month but so far it's 2 days over due.

Could this have something to do with it?

Any other suggestions would be appreciated.

Thanks

[Stanman]

Which channels, have you looked on the 28.E transponder changes thread as that will tell you if the channel has changed the location.

[DeGea468]

Which channels, have you looked on the 28.E transponder changes thread as that will tell you if the channel has changed the location.

From what i can see it's all of the channels that don't work

[Stanman]

Thats probably not a bouquet issue.

Check your tuner configuration and cables in case its been knocked or something.

You could try updating your sat.xml in case its corrupted

[DeGea468]

Thats probably not a bouquet issue.

Check your tuner configuration and cables in case its been knocked or something.

You could try updating your sat.xml in case its corrupted

I checked the cable, Checked the configuration which hasn't changed and updated but still nothing.. I tried a different receiver that didn't give a signal either

[Stanman]

could be your dish alignment or LNB

[DeGea468]

Thanks for trying to help me, I know why it's not working now.

[Stanman]

And the solution was ??