Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 8 123 ... LastLast
Results 1 to 15 of 118

Thread: New Vu+ Hardware Drivers

  1. #1
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts

    New Vu+ Hardware Drivers

    20110526
    - Support HDMI CEC device
    - Support DDP

    20110531
    - Change CEC address scheme
    (read : initiator, write: destination)




    to use these drivers open the relevant archive using winrar

    for the Duo
    Code:
    http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110531.tar.gz
    for the Solo
    Code:
     http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110531.tar.gz
    for the Uno
    Code:
     http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110531.tar.gz
    for the Ultimo
    Code:
    http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuultimo-2.6.18-7.3-4.4.3-20110531.tar.gz
    now navigate to
    lib/modules/2.6.18-**/extra
    on your box
    backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.

    or just wait for these to be incorporated into the VIX image.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  2. The Following 8 Users Say Thank You to Larry-G For This Useful Post:

    bassethound (02-06-11),bo-hlala (16-11-11),FuManchu (02-06-11),paul362 (02-06-11),Sicilian (02-06-11),ukbob (14-11-11)

  3. #2
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    i have loaded the Uno drivers to my box and all is working fine.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  4. The Following 2 Users Say Thank You to Larry-G For This Useful Post:

    bassethound (02-06-11),FuManchu (02-06-11)

  5. #3

    Title
    Senior Member
    Join Date
    Oct 2010
    Location
    Berkshire
    Posts
    9,697
    Thanks
    1,039
    Thanked 4,385 Times in 2,257 Posts
    im guessing andy will impliment this in a update so i will wait as i have 4 different boxes for it to be loaded on to
    PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM


    IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓

  6. #4

    Title
    Senior Member
    Join Date
    Jun 2010
    Posts
    233
    Thanks
    5
    Thanked 40 Times in 36 Posts
    I put these on vix 2.1 restarted box. It works, but still don't what they do.

  7. #5

    Title
    Senior Member
    Join Date
    Oct 2010
    Location
    Berkshire
    Posts
    9,697
    Thanks
    1,039
    Thanked 4,385 Times in 2,257 Posts
    Quote Originally Posted by Alec View Post
    I put these on vix 2.1 restarted box. It works, but still don't what they do.
    can i just advise ppl if they dont know what they are doing or why they are doing it then dont do it
    PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM


    IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ↓

  8. #6
    pooface's Avatar
    Title
    V.I.P
    Join Date
    Jun 2010
    Posts
    9,731
    Thanks
    1,904
    Thanked 4,791 Times in 1,951 Posts
    Read my post in another thread regarding this. It adds hdmi cec na ddp. Definitions of what these are, and allowing you to decide whether you'd want them, are in there...
    Rules can be found HERE
    Support our sponsor, World-Of-Satellite HERE
    Follow us on Twitter HERE
    -----
    Vu+ Ultimo (ViX Beta), Vu+ Solo (ViX Beta), CT ET9000 (ViX Beta)
    Dark Motor Superior with Inverto Ultra Black Twin LNB
    85cm Gibertini Aluminium Dish

  9. The Following User Says Thank You to pooface For This Useful Post:

    mcquaim (07-06-11)

  10. #7
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts

    Vu+ New Drivers (08-07-2011)

    20110708
    - Support DTS audio codec
    - Fix CI recognition problem when restart
    - Fix restart crash/delay problem

    to use these drivers open the relevant archive using winrar

    for the DUO vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110708.tar.gz
    for the SOLO vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110708.tar.gz
    for the UNO vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110708.tar.gz

    now navigate to
    lib/modules/2.6.18-**/extra
    on your box
    backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.

    Vu+Solo
    Code:
     http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110708.tar.gz
    Vu+Duo
    Code:
     http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110708.tar.gz
    Vu+Uno
    Code:
     http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110708.tar.gz
    please note these drivers are incremental and contain all previous releases within, so you only need to flash the latest versions to take advantage of all previous releases.
    also be aware that if you dont know what your doing leave well alone and wait for them to be incorporated into your chosen image.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  11. The Following 6 Users Say Thank You to Larry-G For This Useful Post:

    Alanp (13-07-11),bassethound (13-07-11),Berggren (18-07-11),delboy13 (20-07-11),pass4plex (15-07-11)

  12. #8
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts

    Vu+ New Drivers 15-07-2011 (Uno)

    20110715(uno)
    - Lower the default FAN rpm
    - Increase dynamic range of FAN speed

    to use these drivers open the relevant archive using winrar


    for the UNO vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110715.tar.gz
    now navigate to
    lib/modules/2.6.18-**/extra
    on your box
    backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.

    Vu+Uno
    Code:
     http://archive.vuplus.com/download/drivers/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110715.tar.gz

    please note these drivers are incremental and contain all previous releases within, so you only need to flash the latest versions to take advantage of all previous releases.
    also be aware that if you dont know what your doing leave well alone and wait for them to be incorporated into your chosen image.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  13. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    bassethound (15-07-11),lampiao (15-07-11),Sicilian (15-07-11)

  14. #9
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    20111114
    - Fix HDMI CEC problem(wakeup from standby)
    - Reduce zapping noise in some A/V Receiver
    - Fix Recording/Playback problem
    - Fix High bitrate tuning problem(Uno, MUST Need a FPGA update,
    - Improve media playback
    - Fix skip problem in media playback
    - Change temperature calculation algorithm.(uno, ultimo)
    - Change the lowest FAN speed(ultimo)
    - Fix incorrect keycode in the remote control(ultimo)
    - Add interface to control VFD in the application(ultimo)


    =====================

    To use these drivers open the relevant archive using winrar

    now navigate to

    lib/modules/2.6.18-**/extra
    on your box
    backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.


    once the files have been transferred exit out of the FTP program and start a telnet session ( DO NOT REBOOT THE RECEIVER YET. )

    once you have logged in issue the following command
    depmod -a
    after issuing the mentioned command you can now reboot the receiver.

    To use the FPGA update file ( UNO ONLY ) unrar the file and copy the ( TS_PRO.dat ) file to a memory stick or to TMP on your receiver, now go to plugins and you will see a FPGA update option there, press this and navigate to the file you placed on your usb stick / receiver. This update takes around 5 minutes to complete.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  15. #10
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    20120820
    - Improve TS playback
    - Improve Graphic 2D acceleration
    - Fix Russian VFD display(duo, uno)
    - Fix High/low symbolrate channel scan problem.(Uno, Ultimo : Need FPGA Update)
    -- UNO : http://archive.vuplus.com/download/fpga/vuuno/4.5/
    -- ULTIMO : http://archive.vuplus.com/download/fpga/vuultimo/4.5/
    - Fix EOS detection problem in media playback
    - Enhance Security

    Download via
    Code:
    http://archive.vuplus.com/download/drivers/
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  16. The Following User Says Thank You to Larry-G For This Useful Post:

    bassethound (20-08-12)

  17. #11
    Rob van der Does's Avatar
    Title
    ViX Beta Tester
    Join Date
    Apr 2010
    Location
    The Netherlands & France
    Posts
    36,270
    Thanks
    1,720
    Thanked 9,461 Times in 6,675 Posts
    VU+ has corrected the files on it's server: the download-function in the plugin 'FPGA upgrade', as is installed by default, can now be used (applies to UNO & Ultimo).

    So very easy to do now:
    FPGA Upgrade --> Blue (for download) --> Green (for upgrade)

    Help asked via PM will be ignored.
    The forum is there for help and all will benefit from your questions.
    NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !

    English is not my native tongue.
    I apologise for all my grammar, spelling and idiom errors.

  18. #12
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    new drivers again today.

    20120824
    - Change duo's remote control to the advanced type(for HBBTV)
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  19. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    bassethound (24-08-12),kerijaan (06-05-13),Mr. Mister (24-08-12)

  20. #13
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    ultimo drivers now also online, added to above post with the others.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  21. #14

    Title
    Junior Member
    Join Date
    Mar 2011
    Posts
    4
    Thanks
    12
    Thanked 0 Times in 0 Posts

    Navi x

    Any one comeing up with a navi-x type Xbmc plug in like the jail brake on the Apple TV 2

  22. #15
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    06.05.2013

    New Vu+ Drivers.


    20130506
    - Support dual tuner blindscan(duo2, uno, ultimo)
    - Switching to kernel 3.3.8(solo2, Needs a kernel update)
    - Fix SD video output problem when transcoding enabled(solo2)
    - Enhance demux filtering(solo2)
    - Official duo2 driver release
    - Support DTS-HD
    - Add redundant interface to zapping mode
    DO NOT update the solo2 drivers manually as it needs a kernel update, wait for them to be included in the image, the Solo, Duo, Uno and Ultimo can be updated manually if you want to.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  23. The Following 3 Users Say Thank You to Larry-G For This Useful Post:

    cwebb66 (07-05-13),irishchris (06-05-13),kerijaan (06-05-13)

Page 1 of 8 123 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.