Not sure if its something am doing wrong but just been watching Viasat Xtra PL and the picture quality is terrible where as if I plug my blade 7000hd in the picture is great
Not sure if its something am doing wrong but just been watching Viasat Xtra PL and the picture quality is terrible where as if I plug my blade 7000hd in the picture is great
Is the signal strenght good?
If it is then go to menu av settings and check if your xtrend is set to hdmi etc.
Pioneer 50 inch Kuro tv
Onkyo 906 amp with B&W MT-30 speakers with B&W PV-1 sub.
Vu duo, dreambox 800se and ET9000 stb.
Xtreamer prodigy media player with 4TB Wd black Caviar hdd.Abigs D7 media player 2tb Wd hdd. 6tb of HD movies and counting
Since this is all digital, then signal shouldn't matter. You'll either get a good signal, or blocky/pixellated pictures. I guess the OP is saying that it looks poor quality picture image, rather than pixellated?!
How r u connecting box to tv OP? Are all other channels looking good?
Sent with Tapatalk
hdmi lead, am at the moment trying to get it off full screen and to letter box mode [i think]to see if that sorts it
When i run it threw my blade bx on the same channel the picture is so much better
Last edited by jonc; 24-09-11 at 15:55.
My blade box as a border at the top and bottom of the screen that helps improve the screen but i cant get that on my et5000
I can get it to go in to letterbox sode so it as the borders at the top and bottom of the screen
Sorry on my blade box the picture quality looks so much better but am not sure if its because of the letterbox mode were it as a border on the top and bottom of the screen but my et5000 is full screen and the picture quality looks horrible specially on the none HD channels
how are you connecting to the TV, HDMI or scart?
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
Hdmi.................
are you using the same sat channel for your comparrisons??
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
ye say today I was watching a game on viasat xtra pl on my et5000 full screen but the picture quality looked bad but on my blade letterbox mode the picture was so much better
well to get letterbox mode on the 5000, is easy, go to setup, system/av settings/display 4.3 content as pillabox + display 16.9 content as letter box
also OSD visibilty can be adjusted to suit ( over scan )
Units; VU+Ultimo/duo/DM800/7020HD/tm9100
1.2 channel master/quad feedhorn/36volt /vbox
1 fixed dish, and 1 motorized 1mtr dish
and a pile of redundant cards/cams
Ive done this and still no just do you think a weak signal could cause it