Sly card runs great in smargo but I am still having issues getting it to start on et9000 reboot.
where can i get oscam stable version with smartreader support ?
Anybody knows ?
Sly card runs great in smargo but I am still having issues getting it to start on et9000 reboot.
where can i get oscam stable version with smartreader support ?
Anybody knows ?
Its probably because oscam is starting before the usb to serial drivers load not much you can do about that
Latest versions are available here
BTW a thanks would be niceCode:http://download.oscam.to/index.php
Last edited by Larry-G; 01-08-11 at 23:32.
Thanks for your interest, but its not the usb to serial drivers.
I can start the box without any softcam and after everything boots i run oscam and nothing.
Run cccam kill it then oscam then it works.
coded live link, please can members remember to code links when posted on the forum.
thanks.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Thanks friend Alias1,
Apparently i have not explained my situation properly. My problem is not the autostart of oscam,that works fine.
The problem is that oscam can not initialize the card from startup by itself.
I have to run cccam till the card opens, and when that happens, I kill cccam and then start up oscam for it to work properly.
This only happens with the smargo, my other card that is in the internal reader works fine.
If i use my card in the internal that works fine to, but i prefer the smargo do to better ecm times.
I use cccam only to initialize my card in the beginning, for no other reason.
When you start oscam the first time (when card is not initialised), can you get the contents of the log and post it? Then, when the card is initialised, post the contents of the oscam log again? Just so that can compare the 2 results to see if there's something showing why it's not initialising?!
I say again I dont think oscam is opening the port if you like PM me your log of oscam when it fails to run and I will tell you for sure what the problem is.
Also make sure CCcam is not autostarting in fact before you run either of them do a ps from telnet and post the output here
Another thing to try is from telnet type dmesg before running oscam and see if that fixes the problem
Thank yo friends for your replies.
Here is my log:
Thank you again.Code:------------------------------------------------------------------------------- >> OSCam << cardserver started at Wed Aug 3 11:08:36 2011 ------------------------------------------------------------------------------- 2011/08/03 11:08:36 2AAC7040 s >> OSCam << cardserver started, version 1.10rc-svn, build #5729 (mips-tuxbox-linux) 2011/08/03 11:08:36 2AAC7040 s version=1.10rc-svn, build #5729, system=mips-tuxbox-linux, nice=-1 2011/08/03 11:08:36 2AAC7040 s client max. idle=120 sec, debug level=0 2011/08/03 11:08:36 2AAC7040 s max. logsize=10 Kb, loghistorysize=4096 bytes 2011/08/03 11:08:36 2AAC7040 s client timeout=3000 ms, fallback timeout=2500 ms, cache delay=0 ms 2011/08/03 11:08:36 2AAC7040 s services reloaded: 0 services freed, 22 services loaded, rejected 0 2011/08/03 11:08:36 2AAC7040 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 2011/08/03 11:08:36 2AAC7040 s signal handling initialized (type=sysv) 2011/08/03 11:08:36 2AAC7040 s 377 service-id's loaded in 13ms 2011/08/03 11:08:36 2AAC7040 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded 2011/08/03 11:08:36 2AAC7040 s 7 provid's loaded 2011/08/03 11:08:36 2AAC7040 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded 2011/08/03 11:08:36 2AAC7040 s monitor: disabled 2011/08/03 11:08:36 2AAC7040 s camd33: disabled 2011/08/03 11:08:36 2AAC7040 s camd35: disabled 2011/08/03 11:08:36 2AAC7040 s cs378x: disabled 2011/08/03 11:08:36 2AAC7040 s newcamd: initialized (fd=7, port=15001, ip=10.10.5.5, crypted) 2011/08/03 11:08:36 2AAC7040 s CAID: 0604 2011/08/03 11:08:36 2AAC7040 s provid #0: 000000 2011/08/03 11:08:36 2AAC7040 s newcamd: initialized (fd=8, port=15002, ip=10.10.5.5, crypted) 2011/08/03 11:08:36 2AAC7040 s CAID: 0963 2011/08/03 11:08:36 2AAC7040 s provid #0: 000000 2011/08/03 11:08:36 2AAC7040 s radegast: disabled 2011/08/03 11:08:36 2AAC7040 s http thread started 2011/08/03 11:08:36 2AAC7040 s creating thread for device /dev/sci1 2011/08/03 11:08:36 2B2214B0 r reader thread started (thread=2B2214B0, label=mycard, device=/dev/sci1, detect=cd, mhz=600, cardmhz=600) 2011/08/03 11:08:36 2AAC7040 s creating thread for device /dev/ttyUSB0 2011/08/03 11:08:36 2AAC7040 s loadbalancer: can't read from file /tmp/.oscam/stat 2011/08/03 11:08:36 2AAC7040 s waiting for local card init 2011/08/03 11:08:36 2B1214B0 h HTTP Server listening on port 16002 2011/08/03 11:08:36 2B4FF4B0 r reader thread started (thread=2B4FF4B0, label=skyuk, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357) 2011/08/03 11:08:36 2B4FF4B0 r smargo init 2011/08/03 11:08:36 2B2214B0 r mycard card detected 2011/08/03 11:08:36 2B4FF4B0 r skyuk card detected 2011/08/03 11:08:28 2B2214B0 r ERROR in IO_Serial_Read (errno=11 Resource temporarily unavailable) 2011/08/03 11:08:28 2B2214B0 r ATR is malformed, it reports 13 historical bytes but there are only 6 2011/08/03 11:08:28 2B2214B0 r ATR: C1 FD 1E FC CD 21 BE B2 F3 8F 21 CD B2 B2 2011/08/03 11:08:28 2B2214B0 r ERROR: Could not read reader->convention 2011/08/03 11:08:28 2B2214B0 r Error activating card. 2011/08/03 11:08:30 2B4FF4B0 r ATR: 00 00 2011/08/03 11:08:30 2B4FF4B0 r ERROR: Could not read reader->convention 2011/08/03 11:08:30 2B4FF4B0 r Error activating card. 2011/08/03 11:08:33 2B2214B0 r ERROR in IO_Serial_Read (errno=11 Resource temporarily unavailable) 2011/08/03 11:08:33 2B2214B0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 34 99 2011/08/03 11:08:34 2B2214B0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz 2011/08/03 11:08:35 2B2214B0 r detect irdeto card 2011/08/03 11:08:35 2B2214B0 r caid: 0604, acs: 6.07, country code: GRC 2011/08/03 11:08:36 2B2214B0 r providers: 4, ascii serial: 00000000000, hex serial: 0000000, hex base: 1A 2011/08/03 11:08:39 2B4FF4B0 r ATR: 00 00 2011/08/03 11:08:39 2B4FF4B0 r ERROR: Could not read reader->convention 2011/08/03 11:08:39 2B4FF4B0 r Error activating card. 2011/08/03 11:08:39 2B2214B0 r active providers: 4 (14aade,ffffff,ffffff,ffffff) 2011/08/03 11:08:39 2B2214B0 r found cardsystem irdeto 2011/08/03 11:08:39 2B2214B0 r entitlements for provider: 1, id: 14AADE 2011/08/03 11:08:39 2B2214B0 r chid: 0002, date: 2007/02/16 - 2007/03/18 2011/08/03 11:08:39 2B2214B0 r chid: 0003, date: 2007/02/16 - 2007/03/18 2011/08/03 11:08:39 2B2214B0 r chid: 0014, date: 2007/02/16 - 2007/03/08 2011/08/03 11:08:39 2B2214B0 r chid: 0076, date: 2007/02/17 - 2007/03/19 2011/08/03 11:08:39 2B2214B0 r chid: FFD8, date: 2007/02/07 - 2007/02/17 2011/08/03 11:08:39 2B2214B0 r chid: 7FFB, date: 2007/02/07 - 2007/02/17 2011/08/03 11:08:39 2B2214B0 r chid: 7FFF, date: 2007/02/07 - 2007/03/09 2011/08/03 11:08:39 2B2214B0 r chid: 7FFD, date: 2007/02/07 - 2007/03/09 2011/08/03 11:08:44 2B2214B0 r [irdeto-reader] ready for requests 2011/08/03 11:08:47 2B4FF4B0 r ATR: 00 00 2011/08/03 11:08:47 2B4FF4B0 r ERROR: Could not read reader->convention 2011/08/03 11:08:47 2B4FF4B0 r Error activating card. 2011/08/03 11:08:47 2B4FF4B0 r card initializing error 2011/08/03 11:08:48 2AAC7040 s init for all local cards done
Last edited by olerocker; 03-08-11 at 09:55.
Here is my log when all is working fine:
Thanks againCode:------------------------------------------------------------------------------- >> OSCam << cardserver started at Wed Aug 3 11:38:52 2011 ------------------------------------------------------------------------------- 2011/08/03 11:38:52 2AAC7040 s >> OSCam << cardserver started, version 1.10rc-svn, build #5729 (mips-tuxbox-linux) 2011/08/03 11:38:52 2AAC7040 s version=1.10rc-svn, build #5729, system=mips-tuxbox-linux, nice=-1 2011/08/03 11:38:52 2AAC7040 s client max. idle=120 sec, debug level=0 2011/08/03 11:38:52 2AAC7040 s max. logsize=10 Kb, loghistorysize=4096 bytes 2011/08/03 11:38:52 2AAC7040 s client timeout=3000 ms, fallback timeout=2500 ms, cache delay=0 ms 2011/08/03 11:38:52 2AAC7040 s services reloaded: 0 services freed, 22 services loaded, rejected 0 2011/08/03 11:38:52 2AAC7040 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 2011/08/03 11:38:52 2AAC7040 s signal handling initialized (type=sysv) 2011/08/03 11:38:52 2AAC7040 s 377 service-id's loaded in 7ms 2011/08/03 11:38:52 2AAC7040 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded 2011/08/03 11:38:52 2AAC7040 s 7 provid's loaded 2011/08/03 11:38:52 2AAC7040 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded 2011/08/03 11:38:52 2AAC7040 s monitor: disabled 2011/08/03 11:38:52 2AAC7040 s camd33: disabled 2011/08/03 11:38:52 2AAC7040 s camd35: disabled 2011/08/03 11:38:52 2AAC7040 s cs378x: disabled 2011/08/03 11:38:52 2AAC7040 s newcamd: initialized (fd=7, port=15001, ip=10.10.5.5, crypted) 2011/08/03 11:38:52 2AAC7040 s CAID: 0604 2011/08/03 11:38:52 2AAC7040 s provid #0: 000000 2011/08/03 11:38:52 2AAC7040 s newcamd: initialized (fd=8, port=15002, ip=10.10.5.5, crypted) 2011/08/03 11:38:52 2AAC7040 s CAID: 0963 2011/08/03 11:38:52 2AAC7040 s provid #0: 000000 2011/08/03 11:38:52 2AAC7040 s radegast: disabled 2011/08/03 11:38:52 2AAC7040 s http thread started 2011/08/03 11:38:52 2AAC7040 s creating thread for device /dev/sci1 2011/08/03 11:38:52 2AAC7040 s creating thread for device /dev/ttyUSB0 2011/08/03 11:38:52 2AAC7040 s loadbalancer: can't read from file /tmp/.oscam/stat 2011/08/03 11:38:52 2B2214B0 r reader thread started (thread=2B2214B0, label=mycard, device=/dev/sci1, detect=cd, mhz=600, cardmhz=600) 2011/08/03 11:38:52 2B1214B0 h HTTP Server listening on port 36006 2011/08/03 11:38:52 2B3214B0 r reader thread started (thread=2B3214B0, label=skyuk, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357) 2011/08/03 11:38:52 2B3214B0 r smargo init 2011/08/03 11:38:52 2AAC7040 s waiting for local card init 2011/08/03 11:38:53 2B2214B0 r mycard card detected 2011/08/03 11:38:53 2B3214B0 r skyuk card detected 2011/08/03 11:38:57 2B3214B0 r ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02 2011/08/03 11:38:57 2B3214B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz 2011/08/03 11:38:58 2B2214B0 r ERROR in IO_Serial_Read (errno=11 Resource temporarily unavailable) 2011/08/03 11:38:58 2B2214B0 r ATR is malformed, it reports 13 historical bytes but there are only 6 2011/08/03 11:38:58 2B2214B0 r ATR: C1 FD 1E FC CD 21 BE B2 F3 8F 21 CD B2 B2 2011/08/03 11:38:58 2B2214B0 r ERROR: Could not read reader->convention 2011/08/03 11:38:58 2B2214B0 r Error activating card. 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] parental lock setting: 00 00 22 11 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] type: VideoGuard BSkyB (0963), caid: 0963 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] serial: 00000000, BoxID: 00000000, baseyear: 1997 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] ready for requests 2011/08/03 11:38:58 2B3214B0 r found cardsystem videoguard2 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] skyuk card detected 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] type: VideoGuard BSkyB (0963) 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] tier: 0003, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] tier: 000b, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] tier: 0010, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] tier: 001d, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] tier: 30e1, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] tier: 30e2, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] tier: b732, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:58 2B3214B0 r [videoguard2-reader] tier: b736, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:59 2B3214B0 r [videoguard2-reader] tier: b765, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:59 2B3214B0 r [videoguard2-reader] tier: b766, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:59 2B3214B0 r [videoguard2-reader] tier: b772, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:59 2B3214B0 r [videoguard2-reader] tier: b773, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:59 2B3214B0 r [videoguard2-reader] tier: b846, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:59 2B3214B0 r [videoguard2-reader] tier: b860, expiry date: 2011/09/24-00:00:00 2011/08/03 11:38:59 2B3214B0 r [videoguard2-reader] tier: b991, expiry date: 2011/09/24-00:00:00 2011/08/03 11:39:04 2B2214B0 r ERROR in IO_Serial_Read (errno=11 Resource temporarily unavailable) 2011/08/03 11:39:04 2B2214B0 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 34 99 2011/08/03 11:39:05 2B2214B0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz 2011/08/03 11:39:06 2B2214B0 r detect irdeto card 2011/08/03 11:39:06 2B2214B0 r caid: 0604, acs: 6.07, country code: GRC 2011/08/03 11:39:06 2B2214B0 r providers: 4, ascii serial: 00000000000, hex serial: 0000000, hex base: 1A 2011/08/03 11:39:09 2B2214B0 r active providers: 4 (14aade,ffffff,ffffff,ffffff) 2011/08/03 11:39:09 2B2214B0 r found cardsystem irdeto 2011/08/03 11:39:09 2B2214B0 r entitlements for provider: 1, id: 14AADE 2011/08/03 11:39:09 2B2214B0 r chid: 0002, date: 2007/02/16 - 2007/03/18 2011/08/03 11:39:09 2B2214B0 r chid: 0003, date: 2007/02/16 - 2007/03/18 2011/08/03 11:39:09 2B2214B0 r chid: 0014, date: 2007/02/16 - 2007/03/08 2011/08/03 11:39:09 2B2214B0 r chid: 0076, date: 2007/02/17 - 2007/03/19 2011/08/03 11:39:09 2B2214B0 r chid: FFD8, date: 2007/02/07 - 2007/02/17 2011/08/03 11:39:09 2B2214B0 r chid: 7FFB, date: 2007/02/07 - 2007/02/17 2011/08/03 11:39:09 2B2214B0 r chid: 7FFF, date: 2007/02/07 - 2007/03/09 2011/08/03 11:39:09 2B2214B0 r chid: 7FFD, date: 2007/02/07 - 2007/03/09 2011/08/03 11:39:14 2B2214B0 r [irdeto-reader] ready for requests 2011/08/03 11:39:15 2AAC7040 s init for all local cards done
Last edited by olerocker; 03-08-11 at 09:54.
The problem starts here
2011/08/03 11:08:30 2B4FF4B0 r ATR: 00 00
2011/08/03 11:08:30 2B4FF4B0 r ERROR: Could not read reader->convention
2011/08/03 11:08:30 2B4FF4B0 r Error activating card.
2011/08/03 11:08:33 2B2214B0 r ERROR in IO_Serial_Read (errno=11 Resource temporarily unavailable)
It does not seem to be picking up the atr of the sky UK card
Just out of curiosity does it pick the card up if you remove the card then reinstall it plus on web interface does it say card ok ?? when its not working
Hi,
In the web interface it says card needs initializing then card error. If i take it out and then put it back in I have the same result.
For some reason cccam reads it properly and keeps it active for oscam afterwards.
Looking at the first log, it appears that it's detected the irdeto card. Then, in the second log, it's detected the nds card...
My guess, is that oscam has found the card in the card slot before the smargo, and it using that?!
What happens if you remove the irdeto card, so all you have is the smargo with the nds card in it?
Well I know that both cards are working in the second log, but i will try what you suggest by taking out irdeto card and using just the smargo and will report back.
Thanks
Started box without irdeto card but didnt have any changes, also tried Alias1 suggestion by pulling out card and reinserting it but still no success.
Also got this from log:
Which probably means that what friend Alias1 said about smargo not reading atr of card is probably right.Code:2011/08/03 18:40:03 2B3114B0 r smargo init 2011/08/03 18:40:04 2B3114B0 r skyuk card detected 2011/08/03 18:40:12 2B3114B0 r ATR: 00 00 2011/08/03 18:40:12 2B3114B0 r ERROR: Could not read reader->convention 2011/08/03 18:40:12 2B3114B0 r Error activating card. 2011/08/03 18:40:19 2B3114B0 r ATR: 00 00 2011/08/03 18:40:19 2B3114B0 r ERROR: Could not read reader->convention 2011/08/03 18:40:19 2B3114B0 r Error activating card.
But what does this mean and how can fix I this ?
P.S. I would like to add that the sly card works properly when inserted in the internal slot, and I have also tried another smargo with the same results.
Last edited by olerocker; 03-08-11 at 17:01.