This has me baffled. Next door neighbour was well impressed with my uno 4kse and noticed I had the IR sensor gizmo on my desk BUT it has a jack connection and I cant see any in put for a jack on the box. The manual says IR/RS232||
Am I blind?? Help
This has me baffled. Next door neighbour was well impressed with my uno 4kse and noticed I had the IR sensor gizmo on my desk BUT it has a jack connection and I cant see any in put for a jack on the box. The manual says IR/RS232||
Am I blind?? Help
Hi,
if you have a Uno 4K SE it should look like https://static.wixstatic.com/media/4...4K-SE-back.png you might see a connector which looks a bit like ethernet.
Ralf
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
bmitie (08-05-24)
I can see that but how do I plug jack in,
Surely you just clip it in if it is one for the receiver?
Are you indirectly saying that you bought a sensor that I was designed for another receiver and want to use it on the Vu? Please post a picture of the end. If it is a non-Vu sensor, you will have to cut off the end and reterminate it using the correct adapter. I a pretty sure it is an RJ11 connector. Or cut an unused phone lead and twist wires together.
Its as above and I think its either a mistake or one can buy an adapter. Here is the pic and its no big deal.
abu baniaz (08-05-24)
I don't know if you will get an adapter. You might have to adapt the end. I did for the serial cable. Hopefully someone in the know will respond with a more useful post.
You need to research the cable termination (pinout layout) for the box. Get an RJ11 (telephone cable) as Abu suggested and splice the existing IR receiver into it or swap for the correct model.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
bmitie (09-05-24)
The one that came with my Solo SE has an RJ11 connector.
Green = LED
White = IR
Black = GND
Red= VCC
The colours are in following order (clip at bottom)
Green (LED)
Black (GND)
White (IR)
Red (VCC)
Blank
Blank
Edit: It also works on mu Duo 4K (non-SE)
Last edited by abu baniaz; 04-06-24 at 23:52. Reason: Works on Duo 4k
bmitie (08-06-24)