Does picture in picture work?
Does picture in picture work?
Anybody any ideas at all?
H7S on Alsat Superior Dark Motor with 80 cm mesh dish, running pure2 v7.3-001
If you are using pure2 which is what your signature says, then I would suggest you flash openvix and try that…..I have no idea what pure2 are based on as they block access to their code ( they are obviously superior to everybody else), but I assume its openatv which uses different code for tuners.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
If you don't have openvix loaded you are posting on the wrong forum.
cactikid (04-09-23)
Your signature shows you have a motorised setup are both channels on the same satellite?
No, I do not have openvix
4 way LNB, 1 direct cable goes to tuner A, second direct cable goes to tuner B
H7S has only a single port per each tuner, so impossible to connect in any other way
Tuner A = USALS
Tuner B = Second cable from motorized LNB
I can watch a channel on TV & stream another to PC ONLY if they both come from same transponder (that also means same satellite)
If they are on different transponders (on SAME satellite) only the first channel wins (whichever one was accessed first, either on TV or via stream)
Last edited by sebus; 25-12-23 at 19:22.
H7S on Alsat Superior Dark Motor with 80 cm mesh dish, running pure2 v7.3-001
You are going to have to specify which image you are using because its one area that maybe different between images in the C++. code
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Correct info is in signature
PurE2 7.3.001 (2023-08-18)
H7S on Alsat Superior Dark Motor with 80 cm mesh dish, running pure2 v7.3-001
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
SOLVED (none of the above was of any help)
I ended up with changing the LNB (Golden Media 0.1dB PLL gain twin)
At the same time I re-checked both cables, tightened the endings
It all works without issue (FTA or encrypted channels)
So could it be (somehow) LNB?
The image is/was definitely public - zgemmah7-PurE2-7.3-20230818_multi
Just because it no longer shows in https://www.pur-e2.club/OU/images/in....3/airdigital/ does not make it any different
Last edited by sebus; 13-06-24 at 06:31.
H7S on Alsat Superior Dark Motor with 80 cm mesh dish, running pure2 v7.3-001
Yes - all very well, but this is the OpenVix forum.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony TA-AN1000, Sony UBP-X800M2 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K