iv just got a new motorised gibertini 1 meter dish are u beter off with a feed horn and a c12o unirvasal lnb for signal
iv just got a new motorised gibertini 1 meter dish are u beter off with a feed horn and a c12o unirvasal lnb for signal
No one then any suggestions on this mater
Well I’m amazed no one intrested in this topic
The question you ask really has no good answer. You can mount 10 different lnbs on your dish and get 10 different readings from them. Received signal depends on how you mount the lnb on your dish, how well the lnb and feed are matched to your particular dish, and what frequencies you test them on.
For best results, match the lnb and lnb feed to the dish. Usually this is only done in professional systems and can be expensive. The dish manufacturer will have this information, if it is available. Otherwise, do the best you can with what you have.
deltec (08-08-23),johnrichard (09-08-23)
Just use a good quality offset LNB like the Technomate ones sold by the forum sponsor. Don't fantasize about feedhorns. They are not made for offset dishes and if you modify one to fit the performance will be worse. Anyway an offset LNB already has the correct feedhorn built in.
deltec (08-08-23)
I’ve bought the feed horn from Gibertini and a c120 inverts twin lnb that will go with the Gibertini 1 meter dish and the polar mount when I’ve had it fited in a couple of weeks I’ve been told the feed horn was made for the Gibertini dish’s
Iv bought a vbox posioner what is the best way to set it up to my vu ultimo is there a way to do this could some boday explain the best way to do this
I have a primesat v .box pr1200 iv been told a feed horn makes a lot of difrence
Last edited by deltec; 08-08-23 at 18:48.
What I want to no is what is the best way to set it up if u could help
I ment setting up the vbox to the vu ultimo