Just updated vix image today and box got stuck on boot since , this happened to 3 diferente e2 Box
Zgemma H9s
Xtrend et 8000
Xtrend et 8500
I can still access them via telnet and ftp, but can’t do anything else. Anyone with same problem??
Just updated vix image today and box got stuck on boot since , this happened to 3 diferente e2 Box
Zgemma H9s
Xtrend et 8000
Xtrend et 8500
I can still access them via telnet and ftp, but can’t do anything else. Anyone with same problem??
Well, there have been no Vix updates today. The last Vix update Release was ~ a month ago
Are you instead saying, you have flashed/installed openvix 6.3 007 and restored settings and it is not booting? If so, something in your restore is probably causing this. Best you start enigma2 in console mode and upload what it says. This will reveal the problem.
Using Putty or similar, issue following commands
init 4
enigma2
Just for reference, to restart it normally
init 4
init 3
Last edited by abu baniaz; 03-05-23 at 20:16.
x 5 (03-05-23)
hi, no i updated all from 6.3 003 to 6.3 007 and all of them got stuck, i did not restore any settings, just normal software update with remote
abu baniaz (04-05-23)
root@et8500:~# init 4
root@et8500:~# enigma2
[Enigma2] PYTHONPATH: /usr/lib/enigma2/python
[Enigma2] DVB_API_VERSION 5 DVB_API_VERSION_MINOR 11
ENIGMA_DEBUG_LVL=4
< 466.6999> 22:47:24.9622 [Avahi] avahi_timeout_new
< 466.7005> 22:47:24.9628 [Avahi] avahi_watch_new(3 0x1)
< 466.7008> 22:47:24.9631 [Avahi] avahi_timeout_update
< 466.7014> 22:47:24.9636 [Avahi] avahi_timeout_new
< 466.7022> 22:47:24.9645 [Avahi] avahi_timeout_free
< 466.7028> 22:47:24.9650 [Avahi] avahi_timeout_new
< 466.7042> 22:47:24.9665 [Avahi] avahi_timeout_free
< 466.7045> 22:47:24.9668 [Avahi] avahi_timeout_new
< 466.7053> 22:47:24.9675 [Avahi] avahi_timeout_free
< 466.7057> 22:47:24.9679 [Avahi] avahi_timeout_new
< 466.7074> 22:47:24.9697 [Avahi] avahi_timeout_free
< 466.7078> 22:47:24.9700 [Avahi] avahi_timeout_new
< 466.7090> 22:47:24.9713 [Avahi] avahi_timeout_free
< 466.7095> 22:47:24.9717 [Avahi] avahi_timeout_new
< 466.7111> 22:47:24.9733 [Avahi] avahi_timeout_free
< 466.7113> 22:47:24.9735 [Avahi] client state: 2
< 466.7119> 22:47:24.9742 [Avahi] avahi_timeout_new
< 466.7133> 22:47:24.9756 [Avahi] avahi_timeout_free
< 466.7135> 22:47:24.9758 [eInit] + (1) Background File Eraser
< 466.7137> 22:47:24.9760 [eInit] + (5) Tuxtxt
< 466.7139> 22:47:24.9761 [eInit] + (8) graphics acceleration manager
< 466.7141> 22:47:24.9764 [eInit] + (9) Font Render Class
< 466.7142> 22:47:24.9765 [Font] Initializing lib...
< 466.7153> 22:47:24.9776 [Font] Loading fonts...
< 466.7155> 22:47:24.9778 [Font] Intializing font cache, using max. 4MB...
< 466.7157> 22:47:24.9780 [eInit] + (9) gLCD
< 466.7159> 22:47:24.9782 [eFbLCD] /dev/fb1 4860k video mem
< 466.7200> 22:47:24.9823 [eFbLCD] double buffering available!
< 466.7544> 22:47:25.0167 [gLCDDC] resolution: 720x576x32 stride=2880
< 466.7546> 22:47:25.0168 [eInit] + (9) GFBDC
< 466.7547> 22:47:25.0173 [fb] /dev/fb0: 24300k video mem
< 466.7757> 22:47:25.0380 [fb] double buffering available!
< 467.1267> 22:47:25.3890 [gFBDC] resolution: 1920x1080x32 stride=7680, 8100kB available for acceleration surfaces.
< 467.1270> 22:47:25.3893 [eInit] + (10) gRC
< 467.1276> 22:47:25.3899 [gRC] thread created successfully
< 467.1278> 22:47:25.3901 [eInit] + (15) eWindowStyleManager
< 467.1279> 22:47:25.3902 [eInit] + (20) AVSwitch Driver
< 467.1281> 22:47:25.3904 [eAVSwitch] failed to open /dev/dbox/fp0 to monitor vcr scart slow blanking changed: Function not implemented
< 467.1282> 22:47:25.3905 [eInit] + (20) misc options
< 467.1283> 22:47:25.3906 [eInit] + (20) RC Input layer
< 467.1284> 22:47:25.3907 [eInit] + (20) UHF Modulator
< 467.1285> 22:47:25.3908 [eRFmod] couldnt open /dev/rfmod0: Function not implemented
< 467.1287> 22:47:25.3909 [eInit] + (20) DVB-CI UI
< 467.1288> 22:47:25.3911 [eInit] + (21) input device driver
< 467.1292> 22:47:25.3915 [eRCInputEventDriver] devicename=dreambox remote control (native)
< 467.1294> 22:47:25.3917 [eRCInputEventDriver] devicename=dreambox remote control (native)
< 467.1296> 22:47:25.3919 [eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol
< 467.1298> 22:47:25.3921 [eInputDeviceInit] Found 1 input devices.
< 467.1299> 22:47:25.3923 [eInit] + (22) Hdmi CEC driver
< 467.1303> 22:47:25.3925 [eHdmiCEC] detected physical address change: 1000 --> 2000
< 467.1304> 22:47:25.3927 [eHdmiCEC] send message 0F 84 20 00 01
< 467.1308> 22:47:25.3930 [eInit] + (30) eActionMap
< 467.1309> 22:47:25.3931 [eInit] + (35) CA handler
< 467.1316> 22:47:25.3938 [eInit] + (35) CI Slots
< 467.1320> 22:47:25.3943 [CI] scanning for common interfaces..
< 467.1329> 22:47:25.3951 [CI] Slot: 0 setSource: A
< 467.1334> 22:47:25.3957 [CI] eDVBCIInterfaces setInputSource(0, A)
< 467.1338> 22:47:25.3961 [CI] eDVBCIInterfaces setInputSource(1, B)
< 467.1342> 22:47:25.3965 [CI] done, found 1 common interface slots
< 467.1350> 22:47:25.3973 [CI] Streaming CI routing interface not advertised, assuming DVR method
< 467.1357> 22:47:25.3980 [CI] Streaming CI finish interface not advertised, assuming "tuner" method
< 467.1363> 22:47:25.3986 [eInit] + (40) eServiceCenter
< 467.1366> 22:47:25.3988 [eServiceCenter] settings instance.
< 467.1367> 22:47:25.3990 [eInit] + (41) Stream server
< 467.1375> 22:47:25.3998 [Avahi] AvahiServiceEntry (null) (_e2stream._tcp) 8001
< 467.1379> 22:47:25.4002 [Avahi] avahi_timeout_new
< 467.1445> 22:47:25.4068 [Avahi] avahi_timeout_free
< 467.1451> 22:47:25.4074 [Avahi] avahi_timeout_new
< 467.1464> 22:47:25.4087 [Avahi] avahi_timeout_free
< 467.1469> 22:47:25.4091 [Avahi] avahi_timeout_new
< 467.1482> 22:47:25.4105 [Avahi] avahi_timeout_free
< 467.1486> 22:47:25.4108 [Avahi] Will Register et8500 (_e2stream._tcp) on et8500:8001
< 467.1497> 22:47:25.4120 [Avahi] avahi_timeout_new
< 467.1512> 22:47:25.4135 [Avahi] avahi_timeout_free
< 467.1517> 22:47:25.4140 [Avahi] avahi_timeout_new
< 467.1542> 22:47:25.4165 [Avahi] avahi_timeout_free
< 467.1545> 22:47:25.4168 [Avahi] Registered et8500 (_e2stream._tcp) on et8500:8001
< 467.1546> 22:47:25.4169 [eInit] + (41) Encoders
< 467.1548> 22:47:25.4171 [eInit] + (41) eServiceFactoryDVB
< 467.1550> 22:47:25.4173 [eInit] + (41) eServiceFactoryFS
< 467.1552> 22:47:25.4176 [eInit] + (41) eServiceFactoryMP3
< 467.1557> 22:47:25.4179 [eInit] + (41) eServiceFactoryM2TS
< 467.1558> 22:47:25.4181 [eInit] + (41) eServiceFactoryHDMI
< 467.1559> 22:47:25.4182 [eInit] + (41) eServiceFactoryTS
< 467.1560> 22:47:25.4183 [eInit] + (41) eServiceFactoryWebTS
< 467.1562> 22:47:25.4184 [eInit] + (41) eServiceFactoryDVD
< 467.1563> 22:47:25.4185 [eInit] reached rl 70
< 467.1564> 22:47:25.4187 [eDVBDB] ---- opening lame channel db
< 467.1566> 22:47:25.4189 [eDVBDB] reading services (version 4)
< 467.6343> 22:47:25.8966 [eDVBDB] loaded 1010 channels/transponders and 15108 services
< 467.6346> 22:47:25.8968 [eDVBResourceManager] scanning for frontends..
< 467.6349> 22:47:25.8972 [eDVBFrontend0] opening frontend
< 467.6354> 22:47:25.8976 [eDVBFrontend0] opening frontend
< 467.6357> 22:47:25.8979 [eDVBFrontend] opened frontend m_filename: /dev/dvb/adapter0/frontend0
< 467.6358> 22:47:25.8980 [eDVBFrontend] opened frontend m_fd: 20
< 467.6359> 22:47:25.8981 [eDVBFrontend0] frontend 0 has DVB API 50a
< 467.6361> 22:47:25.8984 [eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
< 467.6365> 22:47:25.8988 [eDVBFrontend0] close frontend
< 467.6367> 22:47:25.8989 [eDVBFrontend0] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
< 467.6373> 22:47:25.8995 [eDVBFrontend1] opening frontend
< 467.6378> 22:47:25.9000 [eDVBFrontend1] opening frontend
< 467.6381> 22:47:25.9004 [eDVBFrontend] opened frontend m_filename: /dev/dvb/adapter0/frontend1
< 467.6383> 22:47:25.9005 [eDVBFrontend] opened frontend m_fd: 20
< 467.6384> 22:47:25.9006 [eDVBFrontend1] frontend 1 has DVB API 50a
< 467.6385> 22:47:25.9008 [eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
< 467.6390> 22:47:25.9013 [eDVBFrontend1] close frontend
< 467.6391> 22:47:25.9014 [eDVBFrontend1] setVoltage FE_ENABLE_HIGH_LNB_VOLTAGE 0 FE_SET_VOLTAGE 2
< 467.6405> 22:47:25.9027 [eDVBAdapterLinux] get demux 0
< 467.6406> 22:47:25.9029 [eDVBAdapterLinux] get demux 1
< 467.6407> 22:47:25.9029 [eDVBAdapterLinux] get demux 2
< 467.6407> 22:47:25.9030 [eDVBAdapterLinux] get demux 3
< 467.6408> 22:47:25.9030 [eDVBAdapterLinux] get demux 4
< 467.6408> 22:47:25.9031 [eDVBAdapterLinux] get demux 5
< 467.6409> 22:47:25.9031 [eDVBAdapterLinux] get demux 6
< 467.6411> 22:47:25.9034 [eDVBResourceManager] found 1 adapter, 2 frontends(2 sim) and 7 demux
< 467.6418> 22:47:25.9040 [eDVBLocalTimeHandler] RTC not ready... wait for transponder time
< 467.6419> 22:47:25.9042 [eEPGCache] Initialized EPGCache (wait for setCacheFile call now)
< 467.6423> 22:47:25.9045 [eEPGTransponderDataReader] Initialized
< 467.6437> 22:47:25.9060 [MAIN] Loading spinners...
< 467.6756> 22:47:25.9378 [ePNG] couldn't open /usr/share/enigma2/slyk-q-1080/spinner/wait13.png
< 467.6757> 22:47:25.9379 [MAIN] Found 12 spinners.
[MAIN] executing main
< 467.6761> 22:47:25.9383 [setIoPrio] best-effort level 3 ok
< 468.2270> 22:47:26.4893 [Image Type] release
< 468.2274> 22:47:26.4896 [Image Version] 6.3
< 468.2278> 22:47:26.4900 [Image Build] 007
< 468.4611> 22:47:26.7234 [StbHardware] Error: getFPVersion failed!
< 468.5870> 22:47:26.8493 [multiboot*****][getMultibootslots]00 device, bootslots /dev/mmcblk0p1 {}
< 468.5879> 22:47:26.8502 [multiboot*****][getMultibootslots]00 device, bootslots /dev/mmcblk1p1 {}
< 468.5885> 22:47:26.8508 [multiboot*****][getMultibootslots]00 device, bootslots /dev/mmcblk0p3 {}
< 468.5892> 22:47:26.8514 [multiboot*****][getMultibootslots]00 device, bootslots /dev/mmcblk0p4 {}
< 468.5897> 22:47:26.8520 [multiboot*****][getMultibootslots]00 device, bootslots /dev/mtdblock2 {}
< 468.5902> 22:47:26.8525 [multiboot*****][getMultibootslots]path found for device = /dev/mtdblock2
< 468.5906> 22:47:26.8529 [Console] command: mount /dev/mtdblock2 /tmp/getMultibootslotsvoa01vxc
< 468.5911> 22:47:26.8534 [eConsoleAppContainer] Starting /bin/sh
< 468.7204> 22:47:26.9827 [multiboot] [getMultibootslots] Finished bootslots = {}
< 468.7207> 22:47:26.9830 [Console] command: umount /tmp/getMultibootslotsvoa01vxc
< 468.7209> 22:47:26.9832 [eConsoleAppContainer] Starting /bin/sh
< 468.7444> 22:47:27.0066 [multiboot*****][getMultibootslots]00 device, bootslots /dev/block/by-name/bootoptions {}
< 468.7486> 22:47:27.0108 [eDVBFrontend] Failed to open /dev/dbox/fp0
< 468.7491> 22:47:27.0113 [Misc_Options] 12Vdetect cannot open /proc/stb/misc/12V_output: Function not implemented
< 468.7792> 22:47:27.0414 [Harddisk] Enumerating block devices...
< 468.8089> 22:47:27.0711 [Harddisk] len partitions = 1, device = sda
< 468.8093> 22:47:27.0715 [Harddisk]2 Found storage device 'sda' (Removable=False) NoPartitions = 1.
< 468.8095> 22:47:27.0718 [Harddisk]1 SystemInfo['HasUsbhdd']= {}
< 468.8126> 22:47:27.0748 [Harddisk] Command: 'hdparm -S0 /dev/sda'.
/dev/sda:
setting standby to 0
(off)
< 469.1363> 22:47:27.3986 [Harddisk] Device 'sda' (Internal (HDD) - ATA (WDC WD5000LPVX-7)) -> '/dev/sda' -> '/dev/sda' (Start Idle).
< 469.1374> 22:47:27.3997 [Harddisk] Found partition 'sda1', description='WDC WD5000LPVX-7 (Partition 1)', device='/sys/devices/platform/strict-ahci.0/ata1/host0/target0:0:0/0:0:0:0'.
< 469.1453> 22:47:27.4075 [Harddisk] len partitions = 1, device = sdb
< 469.1456> 22:47:27.4079 [Harddisk]2 Found storage device 'sdb' (Removable=True) NoPartitions = 1.
< 469.1459> 22:47:27.4082 [Harddisk]1 SystemInfo['HasUsbhdd']= {'sdb': 1}
< 469.1519> 22:47:27.4143 [Harddisk] Device 'sdb' (External (USB) - SanDisk (Cruzer)) -> '/dev/sdb' -> '/dev/sdb'.
< 469.1537> 22:47:27.4160 [Harddisk] Found partition 'sdb1', description='Cruzer (Partition 1)', device='/sys/devices/platform/ehci-brcm.2/usb3/3-1/3-1:1.0/host3/target3:0:0/3:0:0:0'.
< 469.1562> 22:47:27.4185 [Harddisk] Enumerating block devices complete.
< 469.1566> 22:47:27.4189 [Harddisk] Enumerating network mounts...
< 469.1666> 22:47:27.4289 [Harddisk] Enumerating network mounts complete.
< 469.1912> 22:47:27.4535 [Config] Config file loaded ok...
< 469.1969> 22:47:27.4592 [Keyboard] Adding keymap 'Dreambox Keyboard English' ('eng.kmap').
< 469.1986> 22:47:27.4608 [Keyboard] Adding keymap 'Default (US)' ('default.kmap').
< 469.1999> 22:47:27.4622 [Keyboard] Adding keymap 'Dreambox Keyboard Deutsch' ('dream-de.kmap').
< 469.2016> 22:47:27.4639 [Keyboard] Adding keymap 'azerty keyboard' ('azerty.kmap').
< 469.2037> 22:47:27.4659 [Keyboard] Adding keymap 'German keyboard' ('de.kmap').
< 469.2279> 22:47:27.4902 [gRC] main thread is non-idle! display spinner!
< 469.2723> 22:47:27.5345 [Skin] Error: Default skin '/usr/share/enigma2/Simple_Ten_Eighty/skin.xml' is not readable or is not a file! Using emergency skin.
< 469.3251> 22:47:27.5874 [Language] Selected language en_GB is not installed, fallback to en_US!
< 469.3269> 22:47:27.5891 Traceback (most recent call last):
< 469.3273> 22:47:27.5895 File "/usr/lib/enigma2/python/StartEnigma.py", line 33, in <module>
< 469.3294> 22:47:27.5916 Components.SetupDevices.InitSetupDevices()
< 469.3299> 22:47:27.5923 File "/usr/lib/enigma2/python/Components/SetupDevices.py", line 12, in InitSetupDevices
< 469.3310> 22:47:27.5933 File "/usr/lib/enigma2/python/Components/config.py", line 212, in addNotifier
< 469.3321> 22:47:27.5943 File "/usr/lib/enigma2/python/Components/SetupDevices.py", line 8, in languageNotifier
< 469.3337> 22:47:27.5959 File "/usr/lib/enigma2/python/Components/Language.py", line 134, in activateLanguage
< 469.3347> 22:47:27.5969 File "/usr/lib/enigma2/python/Components/Language.py", line 92, in activateLanguage_TRY
< 469.3357> 22:47:27.5980 KeyError: 'en_US'
< 469.3462> 22:47:27.6085 [eDVBDB] ---- saving lame channel db
< 469.6534> 22:47:27.9156 [eDVBDB] saved 1010 channels and 15108 services!
< 470.0523> 22:47:28.3146 [eDVBResourceManager] release cached channel (timer timeout)
< 470.0529> 22:47:28.3152 [Avahi] avahi_timeout_new
< 470.0546> 22:47:28.3169 [Avahi] avahi_timeout_free
< 470.0551> 22:47:28.3173 [Avahi] avahi_watch_free
< 470.0562> 22:47:28.3185 [Avahi] avahi_timeout_free
< 470.0638> 22:47:28.3260 [eInit] - (41) Stream server
< 470.0672> 22:47:28.3295 [eInit] - (41) Encoders
< 470.0674> 22:47:28.3297 [eInit] - (41) eServiceFactoryDVB
< 470.0675> 22:47:28.3298 [eInit] - (41) eServiceFactoryFS
< 470.0676> 22:47:28.3298 [eInit] - (41) eServiceFactoryMP3
< 470.0732> 22:47:28.3355 [eInit] - (41) eServiceFactoryM2TS
< 470.0733> 22:47:28.3356 [eInit] - (41) eServiceFactoryHDMI
< 470.0734> 22:47:28.3356 [eInit] - (41) eServiceFactoryTS
< 470.0735> 22:47:28.3357 [eInit] - (41) eServiceFactoryWebTS
< 470.0735> 22:47:28.3358 [eInit] - (41) eServiceFactoryDVD
< 470.0736> 22:47:28.3358 [eInit] - (40) eServiceCenter
< 470.0736> 22:47:28.3359 [eServiceCenter] clear instance
< 470.0738> 22:47:28.3361 [eInit] - (35) CA handler
< 470.0740> 22:47:28.3363 [eInit] - (35) CI Slots
< 470.0749> 22:47:28.3372 [eInit] - (30) eActionMap
< 470.0751> 22:47:28.3373 [eInit] - (22) Hdmi CEC driver
< 470.0753> 22:47:28.3375 [eInit] - (21) input device driver
< 470.0911> 22:47:28.3534 [eInit] - (20) AVSwitch Driver
< 470.0912> 22:47:28.3535 [eInit] - (20) misc options
< 470.0914> 22:47:28.3536 [eInit] - (20) RC Input layer
< 470.0915> 22:47:28.3537 [eInit] - (20) UHF Modulator
< 470.0915> 22:47:28.3538 [eInit] - (20) DVB-CI UI
< 470.0917> 22:47:28.3540 [eInit] - (15) eWindowStyleManager
< 470.0918> 22:47:28.3540 [eInit] - (10) gRC
< 470.0922> 22:47:28.3544 [gRC] waiting for gRC thread shutdown
< 470.0923> 22:47:28.3545 [gRC] thread has finished
< 470.0924> 22:47:28.3547 [eInit] - (9) Font Render Class
< 470.0925> 22:47:28.3548 [eInit] - (9) gLCD
< 470.0928> 22:47:28.3550 [eInit] - (9) GFBDC
< 470.1014> 22:47:28.3636 [eInit] - (8) graphics acceleration manager
< 470.1015> 22:47:28.3638 [eInit] - (5) Tuxtxt
< 470.1016> 22:47:28.3639 [eInit] - (1) Background File Eraser
< 470.1018> 22:47:28.3640 [eInit] reached rl -1
root@et8500:~#
abu baniaz (04-05-23)
Sorry, not sure what has caused this. The last commit/change to language.py is newer than your image.
Might be related to the bigger jump you have done from 6.3 003 to 6.3 007. Unless someone has a solution, it might be an idea to flash newest image again. It has been out for over a month, so if there was something significantly wrong, we would be inundated with reports. Sorry, I couldn't offer a better solution. I am in no way dismissing the problem you have experienced.Code:< 469.2723> 22:47:27.5345 [Skin] Error: Default skin '/usr/share/enigma2/Simple_Ten_Eighty/skin.xml' is not readable or is not a file! Using emergency skin. < 469.3251> 22:47:27.5874 [Language] Selected language en_GB is not installed, fallback to en_US! < 469.3269> 22:47:27.5891 Traceback (most recent call last): < 469.3273> 22:47:27.5895 File "/usr/lib/enigma2/python/StartEnigma.py", line 33, in <module> < 469.3294> 22:47:27.5916 Components.SetupDevices.InitSetupDevices() < 469.3299> 22:47:27.5923 File "/usr/lib/enigma2/python/Components/SetupDevices.py", line 12, in InitSetupDevices < 469.3310> 22:47:27.5933 File "/usr/lib/enigma2/python/Components/config.py", line 212, in addNotifier < 469.3321> 22:47:27.5943 File "/usr/lib/enigma2/python/Components/SetupDevices.py", line 8, in languageNotifier < 469.3337> 22:47:27.5959 File "/usr/lib/enigma2/python/Components/Language.py", line 134, in activateLanguage < 469.3347> 22:47:27.5969 File "/usr/lib/enigma2/python/Components/Language.py", line 92, in activateLanguage_TRY < 469.3357> 22:47:27.5980 KeyError: 'en_US'
You can flash by command line using grog's script to avoid the USB stick faffing about.
Code:wget --no-check-certificate -O installvix.sh https://dl.dropboxusercontent.com/s/hc2cdr116lvx3dj/install_vix.sh && bash installvix.sh
Just to add, after you flash and it reboots, you will be offered the option to restore settings and plugins. This would have been made the last time you did a software update. It should be fine restoring settings and plugins. If not, reflash again, but don't restore after it reboots.
I'm more intrigued by this line:
< 469.2723> 22:47:27.5345 [Skin] Error: Default skin '/usr/share/enigma2/Simple_Ten_Eighty/skin.xml' is not readable or is not a file! Using emergency skin.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
abu baniaz (04-05-23)
@X5 - so I can see the issue (and hopefully the attachment will fix the issue), just cannot understand how this has not caused an issue before now.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
abu baniaz (04-05-23)
deltec (07-05-23)
Sorry mate been away for work, That fixed the boot problem box booted as normal
abu baniaz (08-05-23),twol (08-05-23)
Please delete the .py file you had transferred. The recreated .pyc file which had used the .py file you sent over will remain. This is so that any future updates to the file are are not undone.
x 5 (08-05-23)