Upgraded LNB now get Tune Failed message

[White Monk]

I'm using an SF8008 on the same LNB as the OP.

My settings file nims section is like this:

config.Nims.0.advanced.lnb.1.bootuptime=2500
config.Nims.0.advanced.lnb.1.lof=unicable
config.Nims.0.advanced.lnb.1.powerinserter=False
config.Nims.0.advanced.lnb.1.scrList=9
config.Nims.0.advanced.lnb.1.unicableManufacturer= GT-SAT
config.Nims.0.advanced.lnb.1.unicableProduct=GT-S3DCSS24
config.Nims.0.advanced.sat.282.lnb=1
config.Nims.0.advanced.sats=282
config.Nims.0.configMode=advanced
config.Nims.0.diseqcA=282
config.Nims.0.diseqcB=3601
config.Nims.0.diseqcC=3601
config.Nims.0.diseqcD=3601
config.Nims.1.advanced.lnb.1.bootuptime=2500
config.Nims.1.advanced.lnb.1.lof=unicable
config.Nims.1.advanced.lnb.1.powerinserter=False
config.Nims.1.advanced.lnb.1.scrList=10
config.Nims.1.advanced.lnb.1.unicableManufacturer= GT-SAT
config.Nims.1.advanced.lnb.1.unicableProduct=GT-S3DCSS24
config.Nims.1.advanced.sat.282.lnb=1
config.Nims.1.advanced.sats=282
config.Nims.1.configMode=advanced
config.Nims.1.configModeDVBT=True
config.Nims.1.diseqcA=282
config.Nims.1.diseqcB=3601
config.Nims.1.diseqcC=3601
config.Nims.1.diseqcD=3601
config.Nims.1.terrestrial=All regions, United Kingdom, (Europe DVB-T/T2)

I'm not too clued up on what this means, but I saw in one of the stickies that these complex LNBs need a bit of extra time to do things hence me loading up the satelliteequipmentsetup plugin ready for Abu, just in case it's needed

I've got 6.3.002 loaded on slot 2 of my SFX6018 which I believe uses the same image as yours but that's a topic for another day.