Do these boxes fail from faulty power supply as like many other boxes and stop things from working correctly , try another power supply and maybe front port.
Do these boxes fail from faulty power supply as like many other boxes and stop things from working correctly , try another power supply and maybe front port.
Did you try flashing again to see if box reboots and how long was it left to see if anything was in process of doing when you had another power supply.
And you got those files from within the Zgemma H7S images?
Back again so what was the file you used ?
I have been told this is the one to use to recover boot issue ?
Openvix 6 2 011 Release Zgemmah7 Recovery Emmc (103.1M) ?
Correct.
I believe I used this guide last time I did it:
Code:https://www.openvix.co.uk/openvix-builds/Guides%20and%20Tutorials/Flashing%20Guides/Zgemma%20USB%20Flashing%20Guides/How%20to%20flash%20a%20Zgemma%20H7%20by%20USB.pdf
But the guide is not completely correct. You need the file with recovery in the name for this process.
Currently:
Code:https://www.openvix.co.uk/openvix-builds/zgemmah7/openvix-6.2.011.release-zgemmah7_recovery_emmc.zip
There are only 3 files in downloads and none mention zip.
Now i know its needing extraction to usb to use it.
The download is a zip file. Just extract it to a fat32 formatted usb stick.
You should just see a zgemma folder in the root of the usb drive.
2022-12-19_093604.png
Willo
#######################
AX HD61 4K UHD Twin (test box)
Vu+ Uno 4K SE
Edision OS Mio 4K
Zgemma H9 Twin
Vu+ Solo 4K
Vu+ Uno 4K
GT-Sat GT-S3DCSS24 Unicable II LNB
GT-Sat GT-dLNB1-DY Unicable II LNB
#######################