IMG_3990.jpg
Hello folks, I'm trying to install xe player but for some reason it won't work. see attached image which displays the error message.
Any guidance would be helpful
IMG_3990.jpg
Hello folks, I'm trying to install xe player but for some reason it won't work. see attached image which displays the error message.
Any guidance would be helpful
Sorted. Not to worry.
Probably by installing 3.1.1
Willo
#######################
AX HD61 4K UHD Twin (test box)
Vu+ Uno 4K SE
Edision OS Mio 4K
Zgemma H9 Twin
Vu+ Solo 4K
Vu+ Uno 4K
GT-Sat GT-S3DCSS24 Unicable II LNB
GT-Sat GT-dLNB1-DY Unicable II LNB
#######################
Hi,
Can you let me know what you did to resolve as I have been getting same error.
I have tried doing a search on here and favourite search again but can't make sense of it all.
Has there been some underpinning code change?
Thanks
found this on another site , which presumably downloads compatible version direct from site
Enigma2/Zgemma
wget -O /tmp/install.sh "http://xeev.net/files/ipk/install3.sh" && chmod 755 /tmp/install.sh && /tmp/install.sh
I'd be interested if anyone has installed XE 3.1.1 successfully on a 6.1. image and doesn't get a crash when trying to use VPN setup from within XE Plugin Menu.......................
it didnt work for me no epg or picons, ended up flashing with openvix 5.4 and xtream editor python2, and all is fine and dandy
Hi Geb789, you can get XE 3.1.1 to work on VIX 6.0.008 so there's no need to go all the way back to 5.4, the following is from a previous post
Xtream editor have updated their plugin to be used with python 3 now.
This is from their website
We have ported our Enigma2 plugin to the newer images with Python3. It is a separate installation and cannot be used with previous images.
As dsayers has posted, Putty command line is used to install it.
Edit py3 command
Code:
wget -O /tmp/install.sh "http://xeev.net/files/ipk/install3.sh" && chmod 755 /tmp/install.sh && /tmp/install.sh
I have three boxes all running Xtream Editor 3.1.1 on latest Vix Image with no issues..................... (At the time Image was 6.0.002)
Last edited by spevs; 12-04-22 at 06:16.
Hi Spevs
thanks for the info will give it a go, iflashed openvix 6.1.004
cheers
hi spevs
just flashed box with vix 6.0.008 and xtream editor and all works fine
thanks
i still cant get the epg to work running openvix 6.1.004 and xe 3.1.1. anyone got any futher with this?
Looking for help, I am running Vu+ zero 4k with updated version of vix (6) and when I install xtream using the above command, it installs but wont open, just sits loading but never opens. Strange thing is it also happens if I revert to openvix version 5 using old pty2 xtream (which worked fine for the last 2 years. I flashed as this issue happened out of the blue on a working system with no manual update from me. I have tried changing to OpenPli and Open ATV but the same issue.
Any Ideas? Could it be an issue with my box?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................
Vu+ Uno4KSE, Dreambox dm900
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K