Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: username/password

  1. #1

    Title
    Junior Member
    Join Date
    Apr 2016
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts

    username/password

    Hi to everyone, I have just got a gigablue quad plus and everything works fine but I need to talk to the box via ftp and think it is password protected as the default does not work. Can anyone suggest how to bypass it or reset it back to default one..

    Cheers Dean.

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    I guess it depends where you got it from?, but should be root and blank password
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  3. The Following User Says Thank You to twol For This Useful Post:

    nottsdeano (14-09-16)

  4. #3
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    On a clean untampered with ViX image (not the so called backup images other forums put out) there is no password as default. However some ftp clients still require you to input one.

    In those cases any password will work, but it's always best for you to set your own as soon as you can.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  5. #4

    Title
    Junior Member
    Join Date
    Apr 2016
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Thanks for your replies guys, I got it second hand and has had the username and password changed. If I factory reset the box and start from scratch installing vix and channels ect will that go to default user and pass?

  6. #5
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    Sadly factory reset on all E2 based receivers is very misleading, in that it won't return the receiver back to factory but rather erase the user area of the current installed image.

    This may or may not reset the password but as it's secondhand I'd recommend you just reflash a new clean image your self. It does not have to be the absolute latest image you can even get the same one your currently using just to make sure it's clean and has no hidden nasties inside. But as always make a backup first so you don't loose any files you may need later.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  7. #6

    Title
    Member
    Join Date
    Apr 2016
    Location
    Helsinki
    Posts
    98
    Thanks
    26
    Thanked 18 Times in 15 Posts
    I'm surprised I haven't seen nobody suggest the following procedure to restore the settings without root password after the flashing, and I haven't tried it myself, but I think it SHOULD work:
    :
    1: make a settings backup, saving it to a usb stick (obviously you can't ftp it from the receiver when you don't know a user/password to do that)
    2: extract the backup file to a temporary directory on a computer
    3: delete etc/passwd from the directory structure of the extracted backup file
    4: make a new tar.gz file so it doesn't contain etc/passwd, making sure it contains otherwise the same directory structure as the original one. Copy it back to the usb stick
    5: reflash the receiver
    6: restore settings from the modified settings backup file you copied to the usb stick

    That way the newly flashed receiver should have otherwise all the previous settings, but the root password should be empty and there should be no other users.

  8. #7
    ccs's Avatar
    Title
    ViX Beta Tester
    Join Date
    Sep 2014
    Posts
    5,836
    Thanks
    554
    Thanked 1,277 Times in 1,089 Posts
    .... aren't passwords stored in /etc/shadow??

  9. #8
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,858
    Thanks
    239
    Thanked 1,673 Times in 1,318 Posts
    Quote Originally Posted by jukkal2 View Post
    3: delete etc/passwd from the directory structure of the extracted backup file
    4: make a new tar.gz file so it doesn't contain etc/passwd, making sure it contains otherwise the same directory structure as the original one. Copy it back to the usb stick
    In which case I'm surprised that you didn't just say to edit out the root password from etc/shadow.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  10. #9

    Title
    Junior Member
    Join Date
    Apr 2016
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Thanks for the advise I have reflashed the box and up and running ..

  11. #10

    Title
    Member
    Join Date
    Apr 2016
    Location
    Helsinki
    Posts
    98
    Thanks
    26
    Thanked 18 Times in 15 Posts
    Quote Originally Posted by birdman View Post
    In which case I'm surprised that you didn't just say to edit out the root password from etc/shadow.
    Right, I forgot etc/shadow. That should also be removed from the edited backup copy.
    Like I said, I haven't tried that myself..

  12. #11
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,858
    Thanks
    239
    Thanked 1,673 Times in 1,318 Posts
    Quote Originally Posted by jukkal2 View Post
    Right, I forgot etc/shadow. That should also be removed from the edited backup copy.
    Like I said, I haven't tried that myself..
    It shouldn't be removed. You need to empty the password field for root in it and leave all files in place.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  13. #12

    Title
    Member
    Join Date
    Apr 2016
    Location
    Helsinki
    Posts
    98
    Thanks
    26
    Thanked 18 Times in 15 Posts
    Quote Originally Posted by jukkal2 View Post
    Right, I forgot etc/shadow. That should also be removed from the edited backup copy.
    Like I said, I haven't tried that myself..
    Quote Originally Posted by birdman View Post
    It shouldn't be removed. You need to empty the password field for root in it and leave all files in place.
    Remove FROM THE SETTINGS BACKUP COPY. So, when you flash the image, the file gets loaded from the image, and that one will remain on the box when there isn't another version in the settings backup to replace it. Isn't that how restoring the backup copy works?

  14. #13
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,858
    Thanks
    239
    Thanked 1,673 Times in 1,318 Posts
    Quote Originally Posted by jukkal2 View Post
    Remove FROM THE SETTINGS BACKUP COPY. So, when you flash the image, the file gets loaded from the image, and that one will remain on the box when there isn't another version in the settings backup to replace it. Isn't that how restoring the backup copy works?
    Apologies. Good point. You're right.
    If you delete shadow and passwd from the backup and restore to a freshly flashed image it will work.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  15. The Following User Says Thank You to birdman For This Useful Post:

    Bangord30 (16-09-16)

  16. #14

    Title
    Member
    Join Date
    Apr 2016
    Location
    Helsinki
    Posts
    98
    Thanks
    26
    Thanked 18 Times in 15 Posts
    Quote Originally Posted by birdman View Post
    If you delete shadow and passwd from the backup and restore to a freshly flashed image it will work.
    Now that I think about it, you can also do it after after flashing when the password has been reset, so you can copy the backup file from the receiver to the computer and the modified version back to the receiver via the network connection, without usng the usb stick.
    So, the procedure without using the usb stick:
    - make a backup copy to the receiver's disk
    - reflash
    - copy the backup file to the computer
    - extract the files from the backup file
    - remove etc/password and etc/shadow from the backup directory structure
    - make the modified backup file
    - copy the modified backup file back to the receiver
    - restore settings from that backup file

  17. #15

    Title
    Junior Member
    Join Date
    Jan 2016
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    go to your network settings, password - and put your password there (example: root) then you can do what you want user root, password root , good luck, stay save, and have fun

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.