Wanted to fit a 1tb ssd drive to the quad and wondering whats needed,box is open and see holes for mounting on a frame when its removed.No cables in box so not sure if it 2 cables and where they plug in toCheers.No screws either.
Wanted to fit a 1tb ssd drive to the quad and wondering whats needed,box is open and see holes for mounting on a frame when its removed.No cables in box so not sure if it 2 cables and where they plug in toCheers.No screws either.
It seems cables are not universal so i am told.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
cactikid (08-12-20)
The drive end of the cable will be standard but the motherboard end may not be. In particular the power cable may be custom - it is in the H7S
Edit: willo beat me to it
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
cactikid (08-12-20)
Had a chat with local sat shop and he remembered not universal cables as they sold Vu receivers which had a different socket+ sending a photo to pc lad as he might have something when i collect repaired laptop.
Have a faulty Walker Saorview box and opened it up same data cable but the power cable is soldered to board lol.Looks the same sockets on the Gigablue.
It's not this one is it?
https://www.aliexpress.com/item/3288...%2315617%23838
cactikid (09-12-20)
What's the story with your Quad? Do you have a photo of the terminations on the motherboard? The data side of SATA should be standard. I'm sure I've got several cables here in my junk pile. The power side may be different, but it's just a 5V and 12V plus 0V on the board. I can have a look at my Quad Plus if you get nowhere. PM me if you're stuck.
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
cactikid (09-12-20)
cactikid (09-12-20)
The board looks like zgemma h7 sockets as Willo posted,i thought i could use the cables off the walker box but it is soldered in place directly -no socket
Motherboard of Quad.
Last edited by cactikid; 09-12-20 at 00:32.
abu baniaz (09-12-20)
cactikid (09-12-20)
I did have a hdd in the h7 but did not work and cables might still be inside.
Looks like a fan header - presumably provides 5V and 12V?
GB Quad Plus, Mut@nt HD51, AX HD61, 80cm dish and Supreme Dark motor. Sony STR-DN 1060, Sony UHP-H1 Bluray, Odroid N2+ (CoreElec), Monitor Audio Bronze 5.1 speakers
Quad is marked Sata and Hdd power which makes it simpler.
I might just put cover back on box and fit ssd to my zgemma h7S which is in main room and less important than the quad and plug externally powered hdd into rear of Quad.