Hi
Tried updating my AXHD61 to .25 but afterwards it boots back into .23?
Hi
Tried updating my AXHD61 to .25 but afterwards it boots back into .23?
Can you perfom an update using the command line and post the results please. Issue these one at a time
Code:init 4Code:opkg updateIf everything is fine and no errorsCode:opkg upgrade
See here if neededCode:init 6
https://www.world-of-satellite.com/s...Linux-commands
daz450 (23-04-20)
OK its rebooting
Last edited by daz450; 23-04-20 at 21:32.
If there is no password, it wont ask you. Otherwise you have used wrong username. It is "root"
In telnet you don't see anything echo'd back as you type in the password, putty is probably the same.
daz450 (23-04-20)
Screen has gone blank ?
got to the 3rd part, screen went black so rebooted box and checked in about and it has now updated THANKS!!!!!
Last edited by daz450; 23-04-20 at 21:41.
Were there any errors during the process?
I don't know, had to reboot the box manually . Is there a way a can find if there were any errors for you ? it all seems to be running OK so far.
Last edited by daz450; 23-04-20 at 21:58.
Just did the manual update to .26 and there were no errors