Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 13 of 13

Thread: No program information for some channels [screenshot included]

  1. #1

    Title
    Junior Member
    Join Date
    Sep 2017
    Posts
    26
    Thanks
    9
    Thanked 0 Times in 0 Posts

    No program information for some channels [screenshot included]

    Hello all,
    Apologies if this is posted in the wrong place, please move if required. I'm using OpenVIX with an Edision OS Mega box [purchased from this site]. I've been using it for a few years now without any trouble.
    I usually don't use the TV during the day, so I've set up a timer for the box to go into deep standby. When I boot up the box from deep standby, there were always a one or two channels for which the program data didn't show in the TV guide, unless I tuned directly to the channel [once I did that, the program data would populate]. See attached screenshot for example.
    I've recently updated my the software to OpenViX 5.3.019 (2020-03-12) and now the problem exists on more channels.

    Can anyone help or advise?

    Thanks in advance,

    DCIMG_9728.jpg

  2. #2
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    Please post a screen grab of your EPG settings.
    Help keep OpenViX servers online.Please donate!

  3. #3

    Title
    Junior Member
    Join Date
    Sep 2017
    Posts
    26
    Thanks
    9
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Huevos View Post
    Please post a screen grab of your EPG settings.
    Pardon the ignorance, where can I get this?

    Thanks

    DC

  4. #4

    Title
    Junior Member
    Join Date
    Sep 2017
    Posts
    26
    Thanks
    9
    Thanked 0 Times in 0 Posts
    B296214E-99FD-48F2-9797-26F46A60BFD0.jpeg

    I’ve attached a screenshot...

    Thanks,

    DC

  5. #5
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    Help keep OpenViX servers online.Please donate!

  6. #6

    Title
    Junior Member
    Join Date
    Sep 2017
    Posts
    26
    Thanks
    9
    Thanked 0 Times in 0 Posts

  7. #7
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    So the channels that are missing are not Freesat channels.

    Have you set up EPG Refresh to pull the OpenTV EPG data from IEPG data channel?
    Help keep OpenViX servers online.Please donate!

  8. #8
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    Channel 4 HD, More 4 are not part of the Freesat package, so there is no Freesat EPG for them.

    A guide is here
    https://www.world-of-satellite.com/s...off-the-stream

  9. #9

    Title
    Senior Member
    Join Date
    Mar 2017
    Posts
    211
    Thanks
    91
    Thanked 20 Times in 18 Posts
    Quote Originally Posted by abu baniaz View Post
    Channel 4 HD, More 4 are not part of the Freesat package, so there is no Freesat EPG for them.

    A guide is here
    https://www.world-of-satellite.com/s...off-the-stream
    The PDF on that post doesn't download

    Sent from my ONEPLUS A6003 using Tapatalk

  10. #10

    Title
    Senior Member
    Join Date
    Mar 2017
    Posts
    211
    Thanks
    91
    Thanked 20 Times in 18 Posts
    Try here pending PDF availablity
    .
    https://www.world-of-satellite.com/s...d.php?p=495399

    Sent from my ONEPLUS A6003 using Tapatalk

  11. #11

    Title
    Junior Member
    Join Date
    Sep 2017
    Posts
    26
    Thanks
    9
    Thanked 0 Times in 0 Posts
    Thank you all for the replies. As per the instructions in the PDF, I have added the IEPG data channel to the EPG Refresh and set up an automated 'fake recording'.

    Should this then populate the EPG data for channel 4HD, More4, film4+1 etc? I have set this up but there is no change so far in the EPG for these channels. Are there any checks anything else I need to do?

    What about channels such as CNBC HD, Al Jazeera HD etc.? Are these covered by the IEPG channel data?

    Thanks again for the help!

    Cheers,

    DC

  12. #12

    Title
    Senior Member
    Join Date
    Mar 2017
    Posts
    211
    Thanks
    91
    Thanked 20 Times in 18 Posts
    Quote Originally Posted by dcGT View Post
    Thank you all for the replies. As per the instructions in the PDF, I have added the IEPG data channel to the EPG Refresh and set up an automated 'fake recording'.

    Should this then populate the EPG data for channel 4HD, More4, film4+1 etc? I have set this up but there is no change so far in the EPG for these channels. Are there any checks anything else I need to do?

    What about channels such as CNBC HD, Al Jazeera HD etc.? Are these covered by the IEPG channel data?

    Thanks again for the help!

    Cheers,

    DC
    All channels should download, try deleting the existing EPG data are rerunning the refresh

    Sent from my ONEPLUS A6003 using Tapatalk

  13. #13

    Title
    Junior Member
    Join Date
    Sep 2017
    Posts
    26
    Thanks
    9
    Thanked 0 Times in 0 Posts
    Thanks for all help and advice on this one. I tried the 'fake recording' on IEPG data channel but it seemed to interfere with channels during refresh (could not tune to any sat channels). I disabled the auto refresh on this for moment.
    I deleted my EPG data, and ran a new refresh from CrossEPG, this seems to have worked and I get a full 7 day EPG for all channels, including Channel 4 HD. Fingers crossed it continues! Will keep you posted if any problems occur

    Thanks again to all!


    DC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.