Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 13 of 13

Thread: Amiko LX800 USB / Online Firmware Updates

  1. #1

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts

    Amiko LX800 USB / Online Firmware Updates

    AMIKO_LX800_2.0.1.9.bin

    Update release includes:
    Embedded upgrade URL for future online update releases
    FIX MyTV portal URLs being over written by firmware updates
    FIX Connection issues in MyTV for more obscure type 'panel' servers

    Firmware can be download from here:
    Code:
    http://www.amiko.co.uk/lx800/AMIKO_LX800_2.0.1.9.bin
    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default USB Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

  2. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (11-12-19)

  3. #2

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts
    AMIKO_LX800_2.0.2.2.bin

    Update release includes:
    FIX Time and A/V Settings being over written by firmware updates

    Simple online update instructions: (Must already be on at least 2.0.1.9 version firmware as above for online updates to function)
    1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
    2) When asked if you are sure to upgrade to new version choose OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Firmware can be download from here:
    Code:
    http://www.amiko.co.uk/lx800/AMIKO_LX800_2.0.2.2.bin
    Last edited by Amiko UK; 12-12-19 at 11:18.

  4. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (12-12-19)

  5. #3

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts
    AMIKO_LX800_2.0.3.0.bin

    Update release includes:
    FIX playback error for servers with 'Extra Mag Security' (token based) enabled

    Simple online update instructions: (Must already be on at least 2.0.1.9 version firmware as above for online updates to function)
    1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
    2) When asked if you are sure to upgrade to new version choose OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Firmware can be download from here:
    Code:
    http://www.amiko.co.uk/lx800/AMIKO_LX800_2.0.3.0_UK.bin

  6. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (08-01-20)

  7. #4

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts
    AMIKO_LX800_2.0.3.2.bin

    Update release includes:
    FIX issue with remote loading of portal URLs in small number of cases

    Simple online update instructions: (must be UK version firmware to support this online update)
    When receiver is rebooted you will be auto prompted to upgrade firmware if you are not already on the latest version, you can choose OK and upgrade will automatically download and flash or to manually force an online upgrade:
    1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
    2) When asked if you are sure to upgrade to new version choose OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Firmware can be download from here:
    Code:
    http://amiko.co.uk/lx800/AMIKO_LX800_2.0.3.2_UK.bin

  8. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (13-02-20)

  9. #5

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts
    AMIKO_LX800_2.0.3.6_UK.bin

    Update release includes:
    ADD: Parental Control Lock/Unlock function
    ADD: Favourite Category add/remove function
    ADD: Real/Fake Standby function

    Simple online update instructions: (must be UK version firmware to support this online update)
    When receiver is rebooted you will be auto prompted to upgrade firmware if you are not already on the latest version, you can choose OK and upgrade will automatically download and flash or to manually force an online upgrade:
    1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
    2) When asked if you are sure to upgrade to new version choose OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Firmware can be download from here:

    Code:
    http://amiko.co.uk/lx800/AMIKO_LX800_2.0.3.6_UK.bin

  10. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (23-03-20)

  11. #6

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts

    Amiko_lx800_2.0.4.2_uk

    AMIKO_LX800_2.0.4.2_UK.bin

    Update release includes:
    FIX issue with some providers where categories not showing

    Simple online update instructions: (must be UK version firmware to support this online update)
    When receiver is rebooted you will be auto prompted to upgrade firmware if you are not already on the latest version, you can choose OK and upgrade will automatically download and flash or to manually force an online upgrade:
    1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
    2) When asked if you are sure to upgrade to new version choose OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, generally no need to change these from the defaults

    Firmware can be download from here:
    Code:
    http://amiko.co.uk/lx800/AMIKO_LX800_2.0.4.2_UK.bin

  12. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (23-03-20)

  13. #7

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts

    Amiko_lx800_2.0.4.3_uk

    AMIKO_LX800_2.0.4.3_UK.bin

    Update release includes:
    FIX issue with some providers where VOD categories not showing correct content

    Simple online update instructions: (must be UK version firmware to support this online update)
    When receiver is rebooted you will be auto prompted to upgrade firmware if you are not already on the latest version, you can choose OK and upgrade will automatically download and flash or to manually force an online upgrade:
    1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
    2) When asked if you are sure to upgrade to new version choose OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, nsure this part is set to 'All' to be sure of full firmware update

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, ensure this part is set to 'All' to be sure of full firmware update

    Firmware can be download from here:
    Code:
    http://amiko.co.uk/lx800/AMIKO_LX800_2.0.4.3_UK.bin

  14. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (02-04-20)

  15. #8

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts
    AMIKO_LX800_2.0.4.9_UK.bin

    Update release includes:
    "Play failed! You can try again or play other program!" Message removed - Now only blank screen will be shown when there is a stream source issue and an attempt to reconnect will be made
    Up to 15000 channel support upgrade
    VOD cover and virtual keyboard transparent issue fixed
    Improve full screen jump to small window
    Random freezing issue fixed
    VOD list scrolling speed issue fixed
    Subtitle issue fixed

    Simple online update instructions: (must be UK version firmware to support this online update)
    When receiver is rebooted you will be auto prompted to upgrade firmware if you are not already on the latest version, you can choose OK and upgrade will automatically download and flash or to manually force an online upgrade:
    1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
    2) When asked if you are sure to upgrade to new version choose OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, ensure this part is set to 'All' to be sure of full firmware update

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, ensure this part is set to 'All' to be sure of full firmware update

    Firmware can be download from here:
    Code:
    http://amiko.co.uk/lx800/AMIKO_LX800_2.0.4.9_UK.bin

  16. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (28-04-20)

  17. #9

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts

    AMIKO_LX800_2.0.5.6_UK.bin

    AMIKO_LX800_2.0.5.6_UK.bin

    Update release includes:
    - Xtream-Codes API client support added (More Apps > Xtream Codes)
    - m3u files support added (WebTV > Info to load m3u file from USB stick)

    Simple online update instructions: (must be UK version firmware to support this online update)
    When receiver is rebooted you will be auto prompted to upgrade firmware if you are not already on the latest version, you can choose OK and upgrade will automatically download and flash or to manually force an online upgrade:
    1) With LX800 turned on, booted up and connected to Internet in menu go to SETTINGS > Net Upgrade > Start > OK
    2) When asked if you are sure to upgrade to new version choose OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, ensure this part is set to 'All' to be sure of full firmware update

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete - Default Upgrade Type options including 'Section All' will be fine, ensure this part is set to 'All' to be sure of full firmware update

    Firmware can be download from here:
    Code:
    http://www.amiko.co.uk/lx800/AMIKO_LX800_2.0.5.6_UK.bin

  18. The Following User Says Thank You to Amiko UK For This Useful Post:

    abu baniaz (10-07-20)

  19. #10

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts
    AMIKO_LX800_2.0.6.1_UK.bin

    Update release includes:
    - Update YouTube API Key for YouTube and YouTube Kids

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete

    Firmware can be download from here:
    Code:
    http://amiko.co.uk/lx800/AMIKO_LX800_2.0.6.1_UK.bin

  20. #11

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts
    AMIKO_LX800_2.0.7.4_UK.bin

    Update release includes:
    - Update MyTV for connections issues with new XUI panel

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete

    Firmware can be download from here:
    Code:
    http://amiko.co.uk/lx800/AMIKO_LX800_2.0.7.4_UK.bin

  21. #12

    Title
    Member
    Join Date
    Nov 2019
    Posts
    81
    Thanks
    41
    Thanked 78 Times in 59 Posts
    AMIKO_LX800_2.0.7.6_UK.bin

    Update release includes:
    - Update YouTube Server (master) API key
    - Add option for adding YouTube (local) API key - Requires youtube_apikey.xml file and own generated API key

    Simple USB firmware update instructions:
    1) Download above .bin firmware file and place in root of USB stick formatted as FAT32
    2) With LX800 turned on and booted up place USB stick into LX800 and wait few seconds for USB device to be recognised
    3) In menu on LX800 go to SETTINGS > USB Upgrade > File Patch > OK > Highlight .bin file > OK > Start > OK

    Firmware upgrade will begin and STB will reboot once complete

    Firmware can be download from here:
    Code:
    http://amiko.co.uk/lx800/AMIKO_LX800_2.0.7.6_UK.bin
    XML file youtube_apikey.xml can be downloaded from here:
    Code:
    http://amiko.co.uk/lx800/youtube_apikey.xml
    Simple update instructions for adding your own (local) YouTube data API key:
    To add your own YouTube API data key to LX800 then first generate the API with Google, once you have your key then copy and paste this into (over) the 'PASTE-KEY-HERE' part of the youtube_apikey.xml file (between the <value> </vale> tags making sure they stay in place. Once edited then save this file to root of a USB stick, plug the USB stick into the LX800 and enter YouTube, press Settings (red button) and scroll down to API Key source, change this to local, scoll down to Import API Key and press OK. You should now see a pop up message say 'Import 1 Api Key Successful!', press OK, press the exit button and then exit button again until you are back to the main menu and now re-enter YouTube and if all went well this should now be using your own local API key!

  22. The Following User Says Thank You to Amiko UK For This Useful Post:

    Sicilian (26-04-21)

  23. #13

    Title
    Forum Supporter
    Donated Member
    Join Date
    Oct 2011
    Posts
    104
    Thanks
    31
    Thanked 3 Times in 3 Posts
    Is there any possibility that the my tv app portals will be updated to allow longer url than the present allowance.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.