See the attached guide.
Software required is Dreambox edit, download via link below:
Code:
https://dreamboxedit.com/en/
Vhannibal up to Enigma 2 channels lists in link below:
Code:
http://www.vhannibal.net/enigma2.php
NOTE DO NOT USE THE MOTOR LIST, THERE ARE TOO MANY CHANNELS AND THE ALPHA X WILL NOT BOOT. REMOVE SATELLITE THAT YOU WILL NOT BE USING PRIOR TOP UPLOADING TO ALPHA X.
If you upload a channel list and the Alpha X does not boot recover as follows:
1) Power off.
2) Download latest software here: https://www.world-of-satellite.com/s...pha-X-firmware
3) Unzip / unrar and put the firmware on USB stick.
4) Connect USB stick to Alpha X.
5) Hold down reset button in the pin hole right hand side.
6) Connect power, release reset button when display shows UP6.
7) Follow on screen info, select USB > Press red to upgrade firmware > select the firmware you downloaded to USB stick.
8) Wait for the process to complere, do not power off.