Remote Control

[seba672]

I was thinking about getting this receiver for my parents, but would need to be able to programme the remote to operate their TV.

I found this manual on the net, the instructions for setting up the remote are slightly different to those in the guide, in post #3.

Maybe you could test to see if it woks?

Regards
Wallnut

Hi Wallnut guide works on Tiviar Remote

I did try on Panasonic and Samsung TV

all TV codes in Wallnut manual

connectedtothereceiver. A user can transform the remote control into a universal remote control by enteringa4-digitcodefortheTV.
1. FindtheTV’sbrandnamefromthelistofTVcodes. 2. Press and hold the TV button for 3 seconds, and it keeps blinking until any buttonispressed. 3. Enter one of the available TV codes. If the TV code matches one that the remote control has, the TV button blinks three times, which indicates that theTVcodeissettobeused. Otherwise,theTVbuttonbecomesoff. 4. PresstheTVbuttontoseeiftheTVcodeworks. IftheTVgivesnoresponse, repeatthesestepstotryanotherTVcode.
Ifallofthecodesappearnottowork,followthesesteps:
1. PressandholdtheTVbuttonfor3seconds. 2. To find a right TV code, repeat pressing the up or down navigation button untiltheTVresponds. Pressingandholdingeitherofthesesbuttonsallows uptoeightconsecutiveattempts. 3. When the TV turns on or off, press the OK button to set the found code to
63
beused. TheTVbuttonblinksthreetimes.
ItispossibletoidentifywhatTVcodeiscurrentlysetfort heTV.Pressandholdthe TVbuttonfor3seconds. PresstheOKbutton,andtheTVbuttonblinksasmuch asthe numberofeachdigitof theTVcodewitha pausebetweenthedigits. To indicate“0”,itblinksfourtimeswithafasterpacethanfo rtheothernumbers.