Will this support http/https streaming authentication which can be set on in WebIF?
Will this support http/https streaming authentication which can be set on in WebIF?
Hi all,
Please can someone confirm if recording (and/or timeshift) to hdd using client mode should work? I have been trying and my timers keep recording blank shows (0:00).
Any ideas? Thanks.
Kind regards,
Sunny
Do your recordings on the source box.
cactikid (08-04-18)
Thanks but how would I record on source box from client box? Is there a method possible?
Hello,
I think this may have been asked before but if you have a 4K server (Ultimo4k) do you have to have 4K capable clients? I have the latest openvix builds on the source and clients (Edision os mini and Vu duo2) and the clients do not get the bouquets at all. I reflashed both clients and when it does the restart after setting up and saving client mode settings the box just constantly has the spinning vix logo. I left this for a long time to see if it refreshed but not luck. The source box has FBC sat and cable tuners plus iptv bouquets loaded from xtream codes editor. Could it be the iptv bouquets causing the issue or do the clients needs to be 4k too?
Thanks
No, works fine on all non 4K receivers too.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Thank you for confirming that a 4k host does not need a 4k client. Any ideas what I can try now ? Source and proposed clients all running OpenViX 5.1.027. Any ideas on how I can try to get this working, perhaps remove the iptv bouquets on the host and try without them ? any other ideas - reflash the host ?
I made a little progress. I tried using channel importer plugin which I assume is a forerunner to client mode. This also failed but gave some errors indicating it was a problem with the xtreamtv iptv bouquets. It complains about no such file for /tmp/userbouquet.xtream_ftaentertainment.tv
I tried without the iptv bouquets and it worked fine but will still fail again if scheduled and of course will not give iptv on client box. I have a sort of work around just by downloading the full bouquets from source via openwebif and importing to the client. This seems to give everything I need although not very tidy.
I am guessing that you are using xstreamtv to generate IPTV streams from a provider?
If not then just ignore this post!
If you are then there is another plugin (google suls) that will generate IPTV bouquets and epg (using add ons for epgimporter) for most IPTV providers ... these bouquets will be copied and operate normally using client server mode.... no need for anything else.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Timmo65 (01-06-18)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I will look again then as I have the line in multiple formats, certainly m3u stream. I also use it with xcplugin on the same STB box and various other apps on ios and android/firestick. I just remember last time I looked it didnt seem that straight forward to get it going. They could also be resellers but their comms is good so I might ask them first.
My provider said Suls plugin doesn't work with their service.
Um!! not convinced..... but as long as you are happy then fine ...... Its just so easy to set up the bouquets with suls and then use "Client Streaming".
Last edited by abu baniaz; 20-06-18 at 16:41. Reason: remove acronym
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
bbbuk (01-06-18)
I suspect that's more they don't like (support) suls and probably lock down their service. Suls is open to anyone to use so long as provider likes/accepts it. As I said, some don't support Suls and like to control their service more.
This is what I do.