Does Mutant HD51 have low SNR?
My old Solo2 was much better.. and the Sky box has better SNR..
Is that why the Mutant is cheapish?
Does Mutant HD51 have low SNR?
My old Solo2 was much better.. and the Sky box has better SNR..
Is that why the Mutant is cheapish?
I have 2 HD51’s and a Vu+duo 2. If I connect the HD51 I never get anything more than late 70’s snr. The VU+ on the same connection gets 100 SNR. It’s never been a issue as it has never affected the quality of the channels being watched.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
Most likely your Cabling, LNB etc but if its not an issue don’t worry about it.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
My Mutant HD51 has SNR in Mid-60s, and my old Solo2 was mid-70s.. and I am getting pixelation..
Is this a hardware issue or a software issue?
As Andy has replied in your other post. Check your cabling and connectors. All points to that.
Octagon SF8008 4K, VU+Duo 2..
Edision OS MINI,
What might be ok to you isn’t necessary ok with a professional. You are best paying a bit extra and getting a professional installer in and letting them checking it over and testing it etc.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
I changed setting to Increase voltage.. and appear to be getting no pixelation now..
Spoke too soon..
My old VU Solo2 gets 5 SNR higher
Is low SNR on mutant a Hardware issue or a software issue?
This may demonstrate abnormal SNR readings and or config?
screenshot_20180421144125.jpg
Has anyone seen this before
screenshot_20180421144125.jpg
Rather impossible to get that db is it???
I also suffer from Pixelation on occasion
They have acknowledged a bug with the tuner values. They'll fix it in due course
Oh is there a thread to that? will that impact SNR in general for Mutant HD51?
So values reported incorrect.. is there a problem with driver in general?
Thread here. Juicy bits from post 195.
EDIT:Code:https://forums.openpli.org/topic/52120-new-tuner-si2166d-mutnt-51hd/page-10
I have merged your three threads
Last edited by abu baniaz; 22-04-18 at 04:01. Reason: merged threads