Ok Andy thanks
Ok Andy thanks
You will be fine with Kodi on the S2. I have it on one here and it's absolutely fine and whilst not as good as my firetv, it is def £80 better.
You can't put the giant builds on it but then I use about half a dozen addon which is more then enough.
Stick ares wizzard on and install the ORROO firestick lite build.
You get the occasional skin error but works 100%
Sent from my SM-N9005 using Tapatalk
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
Hi mate , best lnb is Inverto Unicable II programmable LNB,also you can add holder adaptor for sky dish MK4 LNB -40mm,
It the receiver has one of the new advanced tuners (like the
VU+ 4K many different channels can be recorded which watching a different channel. A single cable is used between the
LNB and the receiver. It can also be used with multiple receivers as long as the correct unicable software pre-installed.
Unicable IITM - Inverto’s programmable ODU solutions -
Inverto is a leader in single cable solutions since 2005, and a supplier of choice of ODU products for tier-1 satellite
operators across the world. The Unicable II™ is the 2nd generation of single cable distribution products, digital
Channel Stacking supporting up to 32 user bands and based on the latest full-band capture technology.
Quick and simple upgrade of subscribers’ homes from single-tuner single-room setup to multi-room multi-tuner setup
(up to 32 tuners in total) using existing cables, reducing cost and time of upgrades,
or if you need LNB with splitters for 4 outputs. Connect up to 4 receivers,then you have to buy this one ,
The new Inverto Unicable SCR (Single Cable Router)
have look here
http://www.inverto.tv/guide/?p=25
regards Nick
duoduo (03-12-16)
Another way to feed the 4K's FBC tuners is to use a Unicable matrix such as the Spaun SUS 5581 in conjunction with a quattro LNB. On its own, this is an expensive solution to a requirement that can be met more cheaply, but it works well as part of a multi-satellite, multi-receiver installation. I have a toroidal dish with four quattro LNBs for the main satellites I use. These are connected to a DiSEqC multiswitch which provides outputs for Tuners C and D of the Solo 4K as well as for three other receivers. In this way, all the tuners have an unrestricted choice of channels on all four satellites. The Spaun Unicable matrix intercepts the quattro feeds from the 28.2E LNB on their way to the multiswitch, thus avoiding the need to have a separate dish for the FBC tuner - you can simply loop the feeds through it.
An advantage of this system is that it doesn't suffer from digital splats which I was getting when I used quad or octo LNBs with ordinary DiSEqC switches. If I changed channel on one receiver, a momentary glitch would appear on other receivers tuned to other channels, on the live picture and on recordings. I never worked out what was causing this -- LNB voltage transients possibly, or crosstalk in the switches - but the multiswitch system is free of it.
Thank you for the 1st sensible solution I have seen for people,with multiple sats and don,t want to throw away the existing infrastructure ..... at least it gives me an option that I hadn,t seen before ..... Inverto may say they are a "leader" in single cable solutions but their LNB,s are crap,in a marginal signal situation ... and that has been proved in numerous set ups,over here
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
You'll need at least SCR8 for one twin FBC tuner.
https://www.world-of-satellite.co.uk/gt-sat
Take a look at the GT-dLNB1DY, this is SCR24.
Do you have any Freesat TV's or any other receivers that can't use Unicable? If so look at the GT-S3DCSS24 as this also has 3x Legacy outputs.
GT-dLNB1DY
GT-dLNB1DY
GT-dLNB1DY
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable