Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 15 of 15

Thread: VU Solo SE not starting up

  1. #1
    Worzel's Avatar
    Title
    Junior Member
    Join Date
    Oct 2016
    Posts
    13
    Thanks
    6
    Thanked 0 Times in 0 Posts

    VU Solo SE not starting up

    Does anyone know what I can do to get this box up and running?
    Was working fine this last night, now when turned on it sits at the VU logo sign and does nothing.
    Switched it on at the back and pressed the front blue button as the usb stick has the backup on it.
    ?????

  2. #2
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    No such receiver called VU+ Solo2 SE. Most likely you have a clone.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  3. #3
    Worzel's Avatar
    Title
    Junior Member
    Join Date
    Oct 2016
    Posts
    13
    Thanks
    6
    Thanked 0 Times in 0 Posts
    [QUOTE=Andy_Hazza;467882]No such receiver called VU+ Solo2 SE. Most likely you have a clone.


    Apologies Andy, Solo SE, purchased from WOS.

  4. #4
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Phew. Do you know what image was on prior to the receiver just sitting with the VU+ Logo?


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  5. #5
    Worzel's Avatar
    Title
    Junior Member
    Join Date
    Oct 2016
    Posts
    13
    Thanks
    6
    Thanked 0 Times in 0 Posts
    This one
    Openvix 5 1 019 Release Vusolose Usb (74.6M)
    Was always kept up to date.
    Tried re-flashing with 2 different usb sticks which had backups on, ones i've successfully used before and did not work, I also re-formatted them to fat32 and tried again.
    Should I re-flash with an earlier image ?

  6. #6
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts

    VU Solo2 SE not starting up

    To flash an image, you should only have the one usb flash drive inserted (fat 32 formatted and with the latest image (extracted) to the root of the usb flash drive) then power off via the rocker switch, then power back on and the LED light will flash slowly which indicates it is flashing/installing the image. After a few minutes, when the LED light rapidly flashes, you would then power off via the rocker switch, take out the usb flash drive and power back on. Is this what you are doing?


    Sent from my iPhone using Tapatalk
    Last edited by Andy_Hazza; 15-03-18 at 10:33.
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  7. #7
    Worzel's Avatar
    Title
    Junior Member
    Join Date
    Oct 2016
    Posts
    13
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Andy_Hazza View Post
    To flash an image, you should only have the one usb flash drive inserted (fat 32 formatted and with the latest image (extracted) to the root of the usb flash drive) then power off via the rocker switch, then power back on and the LED light will flash slowly which indicates it is flashing/installing the image. After a few minutes, when the LED light rapidly flashes, you would then power off via the rocker switch, take out the usb flash drive and power back on. Is this what you are doing?


    Sent from my iPhone using Tapatalk
    Yes, exactly that, have done it loads of times, seems the box isn't picking up the USB sticks.
    This is a friends box so will ask him what he did to it.

  8. #8
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Hhhhmmmmmm strange. While the usb flash drive is not inserted, will the receiver boot?


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  9. #9
    Worzel's Avatar
    Title
    Junior Member
    Join Date
    Oct 2016
    Posts
    13
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Andy_Hazza View Post
    Hhhhmmmmmm strange. While the usb flash drive is not inserted, will the receiver boot?


    Sent from my iPhone using Tapatalk
    Nope, tried that already.
    If I cannot fix it i'll get him to send to back and he'll have to pay for an expert to fix it, my knowledge only goes so far.

  10. #10
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    It’s most likely a usb issue. I hear/see loads of peeps having issues with usb flash drives. I always use Kingston/HP branded ones and they’ve never failed on me.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  11. #11
    ^^COMPASS^^'s Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Dec 2011
    Posts
    268
    Thanks
    282
    Thanked 307 Times in 125 Posts
    Quote Originally Posted by Worzel View Post
    This one
    Openvix 5 1 019 Release Vusolose Usb (74.6M)
    Was always kept up to date.
    Tried re-flashing with 2 different usb sticks which had backups on, ones i've successfully used before and did not work, I also re-formatted them to fat32 and tried again.
    Should I re-flash with an earlier image ?
    Image backups created using the Image Manager on VU Solose don't create the force.update file needed when flashing via USB stick.


    Extract force.update file attached & send to your USB stick vuplus/solose
    Attached Files Attached Files

    Vu+UNO 4K SE [OE-Alliance-4.4 Firmware 5.4-010-Build Oscam-r11693-798][with keys]
    Vu+DUO 2 [OE-Alliance-4.4 Firmware 5.4-003-Build Oscam-r11572-798][with keys]
    Vu+SOLO 2 [OE-Alliance-4.3 Firmware 5.3-039-Build MGcamd]
    Vu+SOLO SE [OE-Alliance-4.4 Firmware 5.4-003-Build MGcamd]

  12. The Following User Says Thank You to ^^COMPASS^^ For This Useful Post:

    Worzel (16-03-18)

  13. #12
    wullboy's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    Mar 2010
    Location
    North of you
    Posts
    797
    Thanks
    147
    Thanked 147 Times in 116 Posts
    aaaaa. nice one, had issues away back with this box, and was wondering why it wouldn't flash..cheers m8..
    What else can i say !!.....


    You can`t please all of the people all of the time...so...dont even try........ ...


    Code:
    http://www.youtube.com/watch?v=dugJTYz-JR4&feature=em-subs_digest


  14. #13
    Ashley69's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Feb 2015
    Posts
    1,099
    Thanks
    205
    Thanked 290 Times in 246 Posts
    Couch flash?
    Octagon SF8008 4K, VU+Duo 2..
    Edision OS MINI,

  15. #14
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    Quote Originally Posted by Ashley69 View Post
    Couch flash?
    Stuck on Vu+ Boot Screen so unable to “couch flash”.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

  16. #15
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,858
    Thanks
    239
    Thanked 1,673 Times in 1,318 Posts
    Quote Originally Posted by ^^COMPASS^^ View Post
    Image backups created using the Image Manager on VU Solose don't create the force.update file needed when flashing via USB stick.
    It doesn't create it for other images either.
    If it is required then it should be created, so if it isn't that's a bug. There's no point in creating an image backup that can't be used.

    On my two boxes I get a front-panel prompt to press OK if I wish to flash (at least I think I do...a long time since I've done one). But if there is no way to produce such a visible prompt then that needs to be catered for.
    Last edited by birdman; 16-03-18 at 14:32.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.