Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 2 of 2

Thread: Box crashing after installing KODIc

  1. #1

    Title
    Junior Member
    Join Date
    Jan 2018
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Box crashing after installing KODIc

    Hi.

    I have my vu solo box for 2 years.

    Image is OpenVIX.

    After I installed KODI on it, box started acting strange and it goes to reboot.

    Welcome to OpenViX for %h
    openvix Apollo %h

    ]]>
    </imageissue>
    </image>
    <software>
    <enigma2software>
    <![CDATA[
    enigma2 - 3.0+git3+834c084482-r11.0
    enigma2-fonts - 2010.11.14-r11.0
    enigma2-plugin-drivers-network-usb-rtl8192cu - 1.0-r3.0
    enigma2-plugin-extensions-autoswap - 0.5
    enigma2-plugin-extensions-autotimer - 2.0+git0+a965a0b947-r5.3
    enigma2-plugin-extensions-epgsearch - 2.0+git0+a965a0b947-r5.3
    enigma2-plugin-extensions-imdb - 2.0+git0+a965a0b947-r5.3
    enigma2-plugin-extensions-mediascanner - 3.0+git3+834c084482-r11.0
    enigma2-plugin-extensions-openwebif - 1+git0+835e02d010-r0.0
    enigma2-plugin-extensions-pictureplayer - 3.0+git3+834c084482-r11.0
    enigma2-plugin-extensions-xmltvimport - 1.0+git0+e7bdcd0c4b-r31.0
    enigma2-plugin-extensions-xmltvimport-rytec - 20130806-r2.0
    enigma2-plugin-systemplugins-audioeffect - 2.0+git0+79bade8eed-r11.0
    enigma2-plugin-systemplugins-autobouquetsmaker - 2.0+git0+79bade8eed-r11.0
    enigma2-plugin-systemplugins-commoninterfaceassignment - 3.0+git3+834c084482-r11.0
    enigma2-plugin-systemplugins-crossepg - 0.8.1+gitr0+bb7b49a956-r2.0
    enigma2-plugin-systemplugins-hdmicec - 3.0+git3+834c084482-r11.0
    enigma2-plugin-systemplugins-hotplug - 3.0+git3+834c084482-r11.0
    enigma2-plugin-systemplugins-mphelp - 2.0+git0+a965a0b947-r5.3
    enigma2-plugin-systemplugins-networkbrowser - 2.0+git0+a965a0b947-r5.3
    enigma2-plugin-systemplugins-networkwizard - 3.0+git3+834c084482-r11.0
    enigma2-plugin-systemplugins-positionersetup - 3.0+git3+834c084482-r11.0
    enigma2-plugin-systemplugins-satfinder - 3.0+git3+834c084482-r11.0
    enigma2-plugin-systemplugins-toolkit - 2.0+git0+a965a0b947-r5.3
    enigma2-plugin-systemplugins-wirelesslan - 3.0+git3+834c084482-r11.0
    enigma2-plugin-vix-core - 3.0+git0+5e9adc9076-r3.3
    enigma2-skindefault - 1.0+git0+24e0cd8529-r16.0
    ]]>
    </enigma2software>
    <vuplussoftware>
    <![CDATA[
    vuplus-dvb-modules-vusolo - 3.1.1+20140310-r9.0
    vuplus-gst-plugin-dvbmediasink - 0.10+git0+9cd3627a42-r26.0
    vuplus-shutdown - 1.0-r1.0
    ]]>
    </vuplussoftware>
    <gstreamersoftware>
    <![CDATA[
    gst-ffmpeg - 0.10.13-r5.0
    gst-plugin-libxt - 0.10.0+git0+568b515fa8-r0.0
    gst-plugin-subsink - 0.10.0+git0+0cb20d6024-r1.0
    gst-plugins-bad - 0.10.23.1+git0+0518367507-r14.0
    gst-plugins-bad-cdxaparse - 0.10.23.1+git0+0518367507-r14.0
    gst-plugins-bad-faad - 0.10.23.1+git0+0518367507-r14.0
    gst-plugins-bad-fragmented - 0.10.23.1+git0+0518367507-r14.0
    gst-plugins-bad-mms - 0.10.23.1+git0+0518367507-r14.0
    gst-plugins-bad-mpegdemux - 0.10.23.1+git0+0518367507-r14.0
    gst-plugins-bad-rtmp - 0.10.23.1+git0+0518367507-r14.0
    gst-plugins-bad-vcdsrc - 0.10.23.1+git0+0518367507-r14.0
    gst-plugins-base - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-alsa - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-app - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-audioconvert - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-audioresample - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-decodebin - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-decodebin2 - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-ogg - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-playbin - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-subparse - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-typefindfunctions - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-base-vorbis - 0.10.36.1+git0+1e1e6eaf3f-r16.0
    gst-plugins-good - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-apetag - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-audioparsers - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-autodetect - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-avi - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-flac - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-flv - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-icydemux - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-id3demux - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-isomp4 - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-matroska - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-rtp - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-rtpmanager - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-rtsp - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-souphttpsrc - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-udp - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-good-wavparse - 0.10.31.1+git0+5af6f5bfb6-r20.0
    gst-plugins-ugly - 0.10.19.1+git0+5ddd97ff27-r11.0
    gst-plugins-ugly-amrnb - 0.10.19.1+git0+5ddd97ff27-r11.0
    gst-plugins-ugly-amrwbdec - 0.10.19.1+git0+5ddd97ff27-r11.0
    gst-plugins-ugly-asf - 0.10.19.1+git0+5ddd97ff27-r11.0
    gst-plugins-ugly-cdio - 0.10.19.1+git0+5ddd97ff27-r11.0
    gst-plugins-ugly-dvdsub - 0.10.19.1+git0+5ddd97ff27-r11.0
    gst-plugins-ugly-mad - 0.10.19.1+git0+5ddd97ff27-r11.0
    gst-plugins-ugly-mpegaudioparse - 0.10.19.1+git0+5ddd97ff27-r11.0
    gst-plugins-ugly-mpegstream - 0.10.19.1+git0+5ddd97ff27-r11.0
    gstreamer - 0.10.36.1+git0+76fc67b18c-r11.0
    ]]>
    </gstreamersoftware>
    </software>
    <crashlogs>
    <enigma2crashlog>
    <![CDATA[
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    + (9) GFBDC
    10800k video mem
    - double buffering available!
    5040kB available for acceleration surfaces.
    resolution: 720 x 576 x 32 (stride: 5120)
    + (9) gLCDDC
    found OLED display!
    lcd buffer 0x7c4230 8448 bytes, stride 132
    LCD resolution: 132 x 64 x 8 (stride: 132)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    + (21) input device driver
    Input device cccam "dreambox advanced remote control (native)" is a mouse
    Found 1 input devices.
    + (22) Hdmi CEC driver
    eHdmiCEC: detected physical address change: 1000 --> FFFF
    eHdmiCEC: send message 84 FF FF 03
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    CI Slot 0 setSource(0)
    CI Slot 1 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    cannot open /proc/stb/tsmux/input2
    cannot open /proc/stb/tsmux/input3
    done, found 2 common interface slots
    + (35) CA handler
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryHDMI
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    + (41) Stream server
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 147 channels/transponders and 1898 services
    scanning for frontends..
    opening frontend 0
    close frontend 0
    found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 2
    Use valid Linux Time (RTC?)
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/share/enigma2/spinner/wait20.png
    found 19 spinner!
    setIoPrio best-effort level 3 ok
    main thread is non-idle! display spinner!
    couldn't open /proc/stb/misc/12V_output
    [Harddisk] enumerating block devices...
    new Harddisk sda -> /dev/sda -> /dev/sda
    [Harddisk] enumerating network mounts...
    Reading satellites.xml
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7325 DVB-S2 NIM (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
    slot: 0 configmode: simple
    diseqcmode: diseqc_a_b
    sec config completed
    [Time By]: Transponder
    [EPGC] time updated.. but cache file not set yet.. dont start epg!!
    [Ipkg] Added to OPKG destinations: /
    [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
    [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
    [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
    [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    - double buffering available!
    3600kB available for acceleration surfaces.
    resolution: 1280 x 720 x 32 (stride: 5120)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
    [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    Activating keymap: Default (US)
    Activating language English (UK)
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: bestfit
    [VideoMode] setting policy2: scale
    cannot open /proc/stb/avs/0/input_choices
    [VideoMode] setting scaler_sharpness to: 0000000D
    [VideoMode] setMode - port: Scart, mode: PAL, rate: 50Hz
    [EPGC Load] Poller disabled.
    [EPGC Save] Poller disabled.
    [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
    [EPGC] time updated.. start EPG Mainloop
    [EPGC] 60 events read from /etc/enigma2/epg.dat
    Setting OSD position: 40 651 19 535
    Setting OSD alpha: 255
    Setting 3D mode: auto
    Setting 3D depth: 50
    [EPGC Save] Poller disabled.
    [EPGC Load] Poller disabled.
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    Plugin Extensions/WebInterface failed to load: No module named plugin
    [XMLTVImport] autostart (0) cccam free test occured at 1445902808.08
    [AutoTimer] Auto Poll Enabled
    [SoftcamManager] AutoStart Enabled
    [SwapManager] autostart
    [CI_Assignment] activating ci configs:
    [CI_Activate] FOUND 2 CI Slots
    [CI_Activate_Config_CI0] no config file found
    [CI_Activate_Config_CI0] error parsing xml...
    [CI_Activate_Config_CI1] no config file found
    [CI_Activate_Config_CI1] error parsing xml...
    starting hotplug handler
    [CrossEPG_Auto] AutoStart Enabled
    [CrossEPG_Auto] Schedule Disabled at Mon 26 Oct 2015 23:40:08 GMT
    [AutoSwap] checking for existing swaps ...
    [AutoSwap] setting swappiness to 100 ...
    [AutoSwap] setting requests on sda to 4096 ...
    [AutoSwap] setting sectors on sda to 120 ...
    [AutoSwap] checking for available swapfiles ...
    [AutoSwap] /media/hdd/swapfile swapfile will be swapped
    [AutoSwap] checking for available swappartitions ...
    [AutoSwap] available swaps ['/media/hdd/swapfile']
    [SKIN] No skin to read...
    [ImageManager] AutoStart Enabled
    [ImageManager] Backup Schedule Disabled at (now=Mon 26 Oct 2015 23:40:09 GMT)
    [BackupManager] AutoStart Enabled
    [BackupManager] Backup Schedule Disabled at (now=Mon 26 Oct 2015 23:40:09 GMT)
    [AutoBouquetsMaker] AutoStart Enabled
    [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Mon 26 Oct 2015 23:40:09 GMT
    [XMLTVImport] autostart (0) occured at 1445902809.45
    [XMLTVImport] WakeUpTime now set to -1 (now=1445902809)
    warning, skin is missing element state in <class 'Screens.PVRState.TimeshiftState'>
    RemovePopup, id = ZapError
    [Skin] Attribute not implemented: alphatest value: blend
    setValue 50
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    Setvolume: 50 50 (raw)
    Setvolume: 32 32 (-1db)
    [LogManager] Trim Poll Started
    [LogManager] Trash Poll Started
    [LogManager] probing folders
    [LogManager] found following log's: ['/home/root/logs']
    [LogManager] looking in: /home/root/logs
    [LogManager] /home/root/logs: bytesToRemove -10463535
    [NTP]: setting E2 time: 1445902813.15
    playing 1:0:1:132D:7E7:2:11A0000:0:0:0:
    RemovePopup, id = ZapError
    allocate channel.. 07e7:0002
    opening frontend 0
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12148500 Pol 0 SR 27500000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1548 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:1:132D:7E7:2:11A0000:0:0:0:
    allocate demux
    [SwapManager] Found a swapfile on /media/hdd/swapfile
    [SwapManager] Swapfile is already active on /media/hdd/swapfile
    poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 36(17)
    poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 42(17)
    poll: unhandled POLLERR/HUP/NVAL for fd 46(16)
    job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
    [SEC] set static current limiting
    executing opkg --add-dest /:/ update
    set sequence pos 3
    0.0.0.0
    192.168
    ER plugin not found
    [OpenWebif] no plugins to load
    [OpenWebif] started on 80
    [OpenWebif] started on 443
    poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
    job Components.Task.Job name=OnlineVersionCheck #tasks=1 completed with [] in None
    set sequence pos 4
    [SEC] setVoltage 2
    [SEC] sleep 200ms
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 50ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1f, inversion off, m_tuning 2
    OURSTATE: ok
    [eDVBLocalTimerHandler] channel 0x1bcae80 running
    [eEPGCache] channel 0x1bcae80 running
    [EPGC] next update in 2 sec
    stop release channel timer
    ok ... now we start!!
    eventNewProgramInfo 0 0
    have 1 video stream(s) (0200), and 1 cccam server free audio stream(s) (0280), and the pcr pid is 1ffe, and the text pid is 0240
    allocate demux
    decoder state: play, vpid=512, apid=640
    DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x280) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(1) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux0
    VIDEO_SET_STREAMTYPE 0 - ok
    DMX_SET_PES_FILTER(0x200) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x240) - ttx - ok
    DEMUX_START - ttx - ok
    VIDEO_SLOWMOTION(0) - ok
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - ok
    AUDIO_CONTINUE - ok
    AUDIO_CHANNEL_SELECT(0) - ok
    disable teletext subtitles page ffffffffffffffff (und)
    [eDVBCAService] new service 1:0:1:132D:7E7:2:11A0000:0:0:0:
    [eDVBCAService] add demux 0 to slot 0 service 1:0:1:132D:7E7:2:11A0000:0:0:0:
    RemovePopup, id = ZapError
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    [SEC] set dynamic current limiting
    PATready
    use pmtpid 010c for service_id 132d
    CI Slot 1: reset requested
    ci flush
    ci inserted in slot 1
    slot: 0x7c6618
    91 04 00 01 00 41
    RESOURCE MANAGER
    new session nb 1 0x1bfef60
    sendOpenSessionResponse
    eventNewProgramInfo 0 0
    have 1 video stream(s) (0200), and 1 audio stream(s) (0280), and the pcr pid is 1ffe, and the text pid is 0240
    decoder state: play, vpid=512, apid=640
    [eDVBCIInterfaces] gotPMT
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: bestfit
    [VideoMode] setting policy2: scale
    [Dish] tuning failed
    executing opkg --add-dest /:/ cccam account list-upgradable
    poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
    slot: 0x7c6618
    90 02 00 01 9f 80 11 00
    SESSION(1) 9f 80 11:
    mein cam kann: nichts
    [EPGC] start caching events(1445902817)
    sdt update done!
    slot: 0x7c6618
    90 02 00 01 9f 80 10 00
    SESSION(1) 9f 80 10:
    cam fragt was ich kann.
    job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
    slot: 0x7c6618
    91 04 00 02 00 41
    APPLICATION MANAGER
    new session nb 2 0x7f6d88
    sendOpenSessionResponse
    [OnlineVersionCheck] 0 Updates available
    poll: unhandled POLLERR/HUP/NVAL for fd 72(16)
    [eDVBLocalTimerHandler] diff is 0
    [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    [eDVBLocalTimerHandler] not changed
    slot: 0x7c6618
    90 02 00 02 9f 80 21 1e 01 0b 00 00 01 18 43 6f 6e 61 78 20 43 6f 6e 64 69 74 69 6f 6e 61 6c 20 41 63 63 65 73 73
    SESSION(2)/APP 9f 80 21: 01 0b 00 00 01 18 43 6f 6e 61 78 20 43 6f 6e 64 69 74 69 6f 6e 61 6c 20 41 63 63 65 73 73
    application info:
    len: 30
    application_type: 1
    application_manufacturer: 00 0b
    manufacturer_code: 01 00
    menu string: cccam server uk Conax Conditional Access
    in final state.
    [EPGC] abort non avail schedule reading
    [EPGC] abort non avail schedule other reading
    [EPGC] abort non avail netmed schedule reading
    [EPGC] abort non avail netmed schedule other reading
    [EPGC] abort non avail FreeSat schedule_other reading
    [EPGC] abort non avail viasat reading
    [EPGC] nownext finished(1445902824)
    [EPGC] stop caching events(1445902824)
    [EPGC] next update in 60 min
    slot: 0x7c6618
    91 04 00 24 00 41
    DATE-TIME
    new session nb 3 0x1c05760
    sendOpenSessionResponse
    slot: 0x7c6618
    90 02 00 03 9f 84 40 01 00
    SESSION(3)/DATETIME 9f 84 40: 00
    slot: 0x7c6618
    95 02 00 03
    recvCloseSessionRequest
    close Session Request
    slot: 0x7c6618
    91 04 00 03 00 41
    CA MANAGER
    new session nb 3 0x1bfff68
    sendOpenSessionResponse
    slot: 0x7c6618
    90 02 00 03 9f 80 31 02 0b 00
    SESSION(3)/CA 9f 80 31: 0b 00
    ca info:
    0b00
    Slot 1 plugged
    [AutoTimer] Auto Poll
    [AutoTimer] Auto Poll Started
    job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
    poll: unhandled POLLERR/HUP/NVAL for fd 67(16)
    job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
    KEY: 139 MENU
    action -> InfobarMenuActions mainMenu
    KEY: 139 MENU
    KEY: 108 DOWN
    KEY: 108 DOWN
    KEY: 108 DOWN
    KEY: 108 DOWN
    KEY: 352 OK
    action -> OkCancelActions ok
    KEY: 352 OK
    KEY: 398 RED
    KEY: 398 RED
    action -> ColorActions red
    poll: unhandled POLLERR/HUP/NVAL for fd 67(16)
    KEY: 352 OK
    action -> WizardActions ok
    KEY: 352 OK
    KEY: 108 DOWN
    KEY: 108 DOWN
    KEY: 352 OK
    action -> WizardActions ok
    KEY: 352 OK
    KEY: 108 DOWN
    action -> DirectionActions down
    KEY: 108 DOWN
    KEY: 352 OK
    action -> MsgBoxActions ok
    Console: executing in run 0 the command: /usr/bin/opkg remove --autoremove --add-dest /:/ enigma2-plugin-cams-Oscam_6059+CCcam_2.1.3-ViX --force-remove --force-depends
    KEY: 352 OK
    poll: unhandled POLLERR/HUP/NVAL for fd 67(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 67(16)
    KEY: 174 EXIT
    action -> WizardActions back
    Plugin Extensions/WebInterface failed to load: No module named plugin
    Plugin Extensions/WebInterface failed to load: No module named plugin
    KEY: 174 EXIT
    KEY: 174 EXIT
    KEY: 174 EXIT
    KEY: 174 EXIT
    action -> WizardActions back
    KEY: 174 EXIT
    KEY: 174 EXIT
    action -> OkCancelActions cancel
    KEY: 174 EXIT
    KEY: 401 BLUE
    KEY: 401 BLUE
    action -> InfobarExtensions extensions
    Traceback (most recent call last):
    File "/usr/lib/enigma2/python/Components/ActionMap.py", line 48, in action
    File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 2376, in showExtensionSelection
    File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 2372, in updateExtensions
    File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 2328, in getCCcamInfo
    UnboundLocalError: local variable 'softcams' referenced before assignment
    (PyObject_CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x1b5c648>>,('InfobarExtensions', 'extensions')) failed)
    ]]>
    </enigma2crashlog>
    </crashlogs>
    </openvix>

  2. #2
    Andy_Hazza's Avatar
    Title
    Moderator
    Join Date
    Oct 2012
    Location
    Derbyshire, UK
    Posts
    7,287
    Thanks
    2,855
    Thanked 2,126 Times in 1,752 Posts
    If you have the Vu+ Solo, that is no longer supported by ViX and Kodi is not supported for the Solo also.
    Or do you mean Vu+ Solo2? If you do mean the Solo2, you are best updating your image to the latest version as the image you are on (Apollo) is old and out of date and no support can be offered as the plugin feeds won’t be working.


    Sent from my iPhone using Tapatalk
    Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
    Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
    Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
    Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
    Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
    (All receivers installed with the latest Dev build)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.