Venton unibox ABM tune failed

[reeves1985]

I'm not a noob so have had this working perfect before.
I've updated my image on my receiver in this instance using open atv 6.1 latest build 18/11/17

But for some reason abm just keeps giving tune failed
Failed to tune virgin on tuner.
It gives it for both tuners if one or the other is disabled.
I have my net id 40963 in correct but it just won't work.

I know I can receive the channels fine for example a normal scan pulls the channels in on both tuners and I can view channel 4 for example.

But yet abm just keeps giving me this time failed error.

Any help?

[abu baniaz]

Attach your lamdedb files

[abu baniaz]

Please also attach logs as per this thread

http://www.world-of-satellite.com/sh...port-questions

[reeves1985]

Please also attach logs as per this thread

http://www.world-of-satellite.com/sh...port-questions

Thanks for the quick reply
I'll add the logs and lamedb later as I've just gone out now
3 hours of head scratching
Been trying all net ids thinking I'm going mad!

I'm in Doncaster if that helps which doesn't have a dedicated net id but a few years back the net id in a official receiver was 40963 which has worked fine ever since.

The old box image running on another receiver I have works fine on that net id as well as I haven't got around to updating that one yet

[abu baniaz]

Get logs from both please.

[reeves1985]

Get logs from both please.

Will do I'll grab them this afternoon

[reeves1985]

Get logs from both please.

Here's the lamedb file

Other logs to follow
lamedb.txt

[reeves1985]

debug log attached also now
Enigma2-debug-20171119_18-31-06.log

[reeves1985]

I'm not quite sure what to try next as like I say it was working fine until I upgraded the image today.

[abu baniaz]

You said one receiver works, the other does not. I asked you for both logs.

Are you removing one and plugging the same wire into the other one? Or are you using a splitter and different cabling?

Your log shows this

'FE_READ_STATUS', potential driver issue, 145ms

[reeves1985]

sorry the other image is an old openvix image I didn't realise you wanted the logs from that as the abm version is still prior to these pid hacks and works fine.
I'm using the same cable whilst updating the receiver yes. I also know that this receiver is clearing the channels fine and I can scan the channels in fine and actually watch them. so I know there is no issue with the tuners.

it just wont run abm

[reeves1985]

lamedb.workingreceiver.txt

heres the lamdb file from the other receiver.
ill have to grab the log later as its not enabled for debug logs and the mrs is watching something

[reeves1985]

Here's the debug log from the old vix image on the other receiver
Running the old abm which works fine

Enigma2_debug_2017-11-19_18-43-35.log

[reeves1985]

I'm going to try to transfer the older abm from the working receiver to the one that won't work and see if it will run a scan.

At least if it does then we know the problem isn't the image or receiver
Although the receiver was working fine this morning with the older abm so I wouldn't have thought it could be that

[reeves1985]

Well that didn't work either
Still gives the same similar error although the older abm shows
Tune failed fatal

Grrrr