My dreambox 800 HD has been gathering dust for a few years and I dug it out with a view to updating the image.. I messed up and must have uploaded a clone image. How do I overcome the CA error.
My dreambox 800 HD has been gathering dust for a few years and I dug it out with a view to updating the image.. I messed up and must have uploaded a clone image. How do I overcome the CA error.
flash the genuine bootlader
Thanks for prompt reply. However its been years since I originally set one up and the grey matter has deteriorated in the meantime.
I have dug out a null modem cable and serial adapter but am at a loss at reloading bootloader.
flash with e star image and go from there
and do you have the cline
also you need japhar flasher
you need openpli japhar image
Last edited by cats0030; 01-10-17 at 14:37.
If you can get into the recovery console, you flash bootloader in the exact same way as you flash an image.
Code:http://dreambox.de/en/downloads
Many thanks. Japher finally got me sorted with com port on my laptop. Would not work on my desktop.
My original Image was Newnigma 2v4.0.4 2013-09-09 and I was looking for a new Image for IPTV trial.
Any recommendations?
greetings now need rs232 to open the resiver with the loader dreamUP 1339 and then when you read the program ip address it goes through nezverk and saljes sowtvare for that sim then the best you openpli image to make iptv pozz i do it long ..