changing sats does your motor move dish as if dish is off and is there a signal finder on box to check what signal and/lock ?
kingofsats could give you a channel frequency to check, i remember in trying usals for motorised years ago.
changing sats does your motor move dish as if dish is off and is there a signal finder on box to check what signal and/lock ?
kingofsats could give you a channel frequency to check, i remember in trying usals for motorised years ago.
Screenshot of the tuner config on each satellite/tuner combo you are scanning.
Attached Screenshots.
TunerA.jpgTunerB.jpg
I still however can't find a BlindScan Pluging to download.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
You already have it loaded.
When I change channel to a Different SAT I get the following Displayed.
Yes the motor moves fine.
MotorTurning.jpg
I;m not sure if that is what you meant though??
Do you mean from Normal Scanning (Signal Finder)
Or Do you mean if I select another SAT and Frequency Here does the motor say it's moving?
19.2E Signal.jpg
If it's the later No. I don't get the Motor Icon up.
It just waits a while and then shows the New SAT and New Frequecy
13E Signal.jpg
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
cactikid (11-08-17)
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
Just tried Vix-Night-HD didn't make a Difference.
Noticed as soon as I go into Blind Scan
As Soon as I hit the Option the Mini TV Goes off. [BLACK SCREEN]
(Although when I do a Web-IF) Screen shot it still shows so not sure that's relevent.
On your Examples it looks like you still have a Live Picture?
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
@ElBandito, this is the commit that breaks the plugin.
https://github.com/oe-alliance/oe-al...8c84cfb00a7084
I'm going to revert it. It needs to work properly for all users.
DrProzac (11-08-17),el bandido (11-08-17),Sicilian (12-08-17)
Your comment on GITHUB, says about For users
It breaks the plugin for every user that is using "Configuration Mode" == "Simple". Other errors too.
Does that mean if I change the way my Tuner is set-up it should work?
Or is the other Error's going to stop it working as well?
Are you able to BlindScan without issues?
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
Just read the code a bit more.
So I've changed to Config Type Advanced (on TunerB) and set up as SIngle SAT.
Just trying a Blind Scan on there now.
With Limited Parameters.
At least It's now showing the Frequency and not missing them
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
Parameters Used.
28.2Params.JPG
Active Scan Going.
LimitedFrequency.JPG
This is how the TUNER B is now set-up
TunerB_Advanced.JPG
Is there anything else I should changed.
Also how would I set-up TUNER A for the USALS Motor?
Would something like this work (with Correct LAT and LON)
TunerA_Advanced.JPG
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
Plugin works fine for me now and finds channels. If it doesn't find anything for you I suggest it is a drivers problem.
DrProzac (12-08-17)
So did you do an update?
If so how do I get the new update?
Or do I just need to change my Tuners to use Advanced rather than simple?
And did my Config look ok for TUNER B
Last edited by DrProzac; 12-08-17 at 08:10.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...
Yes I did an update. Get the latest file from here:
https://raw.githubusercontent.com/oe.../src/plugin.py
But if the drivers are screwed on your STB like it says elsewhere in this thread, the changes to the .py file won't make any difference.
DrProzac (12-08-17)
Bit beyond me that...
No Idea how to do a Manual update, I thought I might just be able to copy the file into the Correct Directory, but it looks like it's compiled on the Box already in
/usr/bin/blindscan
Oh well... thanks for all your help though
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Edision OS Mega
TUNER A: - Stab HH-90Motor, Inverto Black LNB, Cheapo Lidl 80cm Supermarket Dish, 15W to 42E
TUNER B: - (Nothing Connected) Will be used a 2nd Cable from Motor
TUNER C: - Fixed 28.2E (on Sky Q Hybrid LNB)
Sky Q and 2 Mini's
Lots of Old Dead Equipment...