bomberbuckley (05-07-17)
I've just set client mode up using my technomate nano T2 which has a motorised dish and a fixed sly feed. On my client, a Technomate nano, the channels from the fixed feed come through fine but on the motorised the box displays "No data on transponder! (Timeout reading PAT) . I've tried restarting both boxes any other ideas?
Sent from my MI MAX using Tapatalk
Huevos (07-07-17)
Good job! But it is necessary to finish. Thank you!
vu+ solo2
dose the second box have to be connected to the tuners at the back of the box to use in client mode I was thinking of seting a box up stares in the bed room regards deltec
can I use any box for the second box then or do I have to use a liniux box for the second box in the bed room
I have been testing client mode tonight and noticed a strange problem.
I have an osmega (5.0.014) as the server and technomate 3T combo (5.0.024) as the client. I restart the gui on the 3T and I am getting excellent stream quality from the osmega but as I move through the bouquet services I can only open every second channel.
so for example:
s** hd prem opens
s** prem 1hr not opens
s** hits hd opens
s** hero hd not opens
and so on
etc
this happens in every bouquet
any ideas?
Technomate-TM-Nano-3T - Vu+Solo - Dm800HD - DM518
Inverto MultiConnect LNB system - 1m Orbital dish - zone 2 28e dish
Bangord30 (10-08-17)
I've been meaning to look into this or report it too. It's the same on .24. I thought it was just me as I didn't see anyone else reporting it :-)
My client is vu duo2 and slave is Edision combo if it matters...
Sent from my HUAWEI VNS-L31 using Tapatalk
Chris, do you find some channels work somedays and not the next? And sometimes one ch won't work then it does if keep trying it??
Sent from my HUAWEI VNS-L31 using Tapatalk
All client mode does is import bouquet files from another box. If you guys can't open a stream that is nothing to do with client mode. You need to start looking at your network, and server box to be certain tuners are available.
This is one thing that has always worked perfectly for me, across all my Bouquets, and saves me doing the work manually .. can only praise the implementation
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
It's obviously rare and maybe needs a reflash no restore job. Cheers anyway.
The server box duo2 is definitely in standby btw...
Last edited by Bangord30; 11-08-17 at 18:26.
How many free tuners does it have.
from what I can see I disagree about it being a network problem.
I have 3 tuners running on my osmega, for testing lock a service locally on the dvb-s2 tuner and use the dvb-c tuner services for client mode. if reverse the tuner usage its the same.
I am struggling to see how a network issue is creating a scenario where every alternate service in a bouquet cannot be opened, its just too uniform to be network related.
Technomate-TM-Nano-3T - Vu+Solo - Dm800HD - DM518
Inverto MultiConnect LNB system - 1m Orbital dish - zone 2 28e dish
I'm 19.2 sat and vm cable and happens on both when servers in standby. I'm one of each tuner.
Sent from my HUAWEI VNS-L31 using Tapatalk