In the near future i plan on pulling all my cables out my house and running fresh new cables. Shown below is my current set up, starting from the box on the outside of my house, down the front of the house, into the house to the white VM box with a diplex filter inside. Which i then split, sending one cable to the modem and one back up the front of the house to the bedroom up stairs. I split this cable once more to get two feeds for my gigablue. So in turn splitting my cable twice to get my 3 needed feeds. (1 for modem, 2 for gigablue)
Current.jpg
My future plan is to split the cable once using a 3 way splitter, shown below.
Future.jpg
My questions -
1. Do i need the diplex filter? If so should i put it like i have shown in the picture above? (before the splitter)
2. What splitters would you suggest i use? Currently have cheap ones, see photo below
3. What cable would you suggest? i know RG6 cable but any specific RG6?
4. any other suggestions?
diplex filter i have from vm install originally
Attachment 54511
Splitters
20170804_012146.jpg20170804_012132.jpg
Any help of input would be great.
thanks
jawz