Does it perform better when set to DVB n not IPTV? Any feedback would be great as I'm testing IPTV with mixed results via a Channel List I've created from an m3u file.
Sent from my iPhone using Tapatalk
Does it perform better when set to DVB n not IPTV? Any feedback would be great as I'm testing IPTV with mixed results via a Channel List I've created from an m3u file.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Blu-ray (29-05-17)
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
dfox (29-05-17)
Changing from IPTV to DVB in E-chanellizer is only for the EPG.
It just renames the code of the IPTV CH to the relevant code for the DVB CH so it will appear in your EPG.
And fixes Audio sync
Sent from my SM-G935F using Tapatalk
Andy_Hazza (29-05-17),Blu-ray (29-05-17)
Please do not post links to other sat forum. Upload the image here
The only difference I see is if the service ID starts with 4097, then it's IPTV mode, if it starts with a 1 then it's DVB mode. Some IPTV services don't stream with the 1 at the start. E_Channelizer never added the correct Service ID for me, I had to do that manually. I recorded several channels at once with just a single IPTV sub, not a multi-room.
To get an OE2 bouquet list, when downloading from a X-C site, just select the OE2 from the dropdown box. If you were sent a link, it probably looks like this
Try changing to this and download insteadCode:http://host:port/get.php?username=xxxxx&password=xxxxx&type=m3u&output=ts
Code:http://host:port/get.php?username=xxxxxx&password=xxxxx&type=dreambox&output=ts
Blu-ray (30-05-17)
Interesting. Thanks lincsat . Is this on a latest image . Do u not get any breakup or pixelation?
Sent from my SM-G935F using Tapatalk
im not interested in more than one recording, thats just a bonus, i'd just like to be able to record say a film from IPTV and be able to play it back, without any pixelation \ breakup.
currently i can ONLY do this using an ancient image - Apollo v24
I had build 13 as detailed previously. I'm currently updating to 16 and can try again later. I've not recorded more than 20 minutes of IPTV, so can't say for a full film. IPTV can pixelate and freeze a lot anyway, are you sure the source was OK.
with build v24, i have NO pixelation or breakup whatsoever, when i test with anything current, pixelation straight away on either record, or playback.
definitely not the source at fault.
i will try the changing M3U to Dreambox as you mentioned later on, with a current build, and see if that helps.
I have done loads of testing and it's impossible to record multiple channels with a single IPTV connection, unless you record channels still accessible with the internal tuners from sat dish or cable connection.
Sent from my SM-J320FN using Tapatalk
Andy_Hazza (30-05-17)