I've improved the signal strength but the quality is still poor I've tried everything.
My meter is giving me a good signal strength and quality but the receiver tells me different.
Also can the signal levels cause the box to lockup on certain channels?
Cheers
Sent from my iPhone using Tapatalk
Octagon SF4008 (1tb hdd - Openvix 5.1) Edision Combo (8gb USB - Openvix 5.1)
Can you view Sky Select on that TP without any breakup?
Are you connecting meter at by Dish or where receiver is?
Octagon SF4008 (1tb hdd - Openvix 5.1) Edision Combo (8gb USB - Openvix 5.1)
This is on transponder 12032
At LNB - signal strength 86% quality 75%
Cable at receiver - signal strength 84% quality 71%
Reading on receiver - signal strength 74% quality 21%
Sent from my iPhone using Tapatalk
Octagon SF4008 (1tb hdd - Openvix 5.1) Edision Combo (8gb USB - Openvix 5.1)
Can yo post a screenshot showing 2nd info bar please?
Screenshot of 2nd info bar
Infobar.jpg
Octagon SF4008 (1tb hdd - Openvix 5.1) Edision Combo (8gb USB - Openvix 5.1)
Fresh flash with no settings/plugins and on a automatic scan i'm getting a different signal strength/quality on sky select. Also the channels have stopped locking up, would this be my custom bouquets?
1_0_16_12_4_85_C00000_0_0_0.jpg
Octagon SF4008 (1tb hdd - Openvix 5.1) Edision Combo (8gb USB - Openvix 5.1)
Can someone help me out on this please.
Octagon sf4008 I'm getting tuning failed fatal whilst scanning sky Deutschland in ABM
Edision mini is scanning fine and channels working, signal strength 91% signal quality 90%.
Both using the same dish and same cable coming from the lnb.
Sent from my iPhone using Tapatalk
Octagon SF4008 (1tb hdd - Openvix 5.1) Edision Combo (8gb USB - Openvix 5.1)
Unzip the attached file.
Contains a file called main.pyo.
Place that file in /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/scanner
Restart the box.
Scan Sky DE again.
khan888 (16-05-17)
Huevos (17-05-17)
Hi, I have the same problem on a h2h using cable. If I use the attached zip file, will it sort the problem. Abm says tuning virgin uk then says failed to lock onto frequency.
Sent from my ONEPLUS A3003 using Tapatalk
Khan888.
I had this error setting up a box recently when running ABM for the first time. For me it was because I had a tuner enabled ie configured ie I had set Tuner B to be like Tuner A when there was no physical cable attached to that tuner input at the back of the box.
I set it to "not configured" - problem solved.
My setup is similar to your with a disecq switch bringing together 28.2E and 19.2E but that is I believe academic.
If you do have a cable attached maybe the settings are switch wise or otherwise that "effectively" there is no cable there ie that tuner cannot see a LNB to tune to and so ABM gives the error.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)