The other half is watching Corrie and there is something like a voice over saying what is happening, like 'there is a knock at the door'
What setting is it to turn that feature? off
Would it be anywhere in the Audio /Subtitle settings.
The other half is watching Corrie and there is something like a voice over saying what is happening, like 'there is a knock at the door'
What setting is it to turn that feature? off
Would it be anywhere in the Audio /Subtitle settings.
Last edited by avalon65; 19-04-17 at 20:08.
Turn it off then. Menu > Setup > System > Auto Language Settings > Change "Prefer Audio Track Stored By Service" to No & Green Button to save.
A forum search would have given you this answer.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Thanks, that should do it now.
It was the same with the humax freesat box , in that it did the same thing when corrie was on, and I couldn't remember what it was called to switch it off.
What I find with those settings that the language will revert to the broadcasters language eg Spanish or French .
And the screen advice says "if set to yes it will automatically use the audio you selected before" (stay on English if you change channels and come back to previous channel) if I set it to "no" it will revert to Spanish. On English language stations "BBC" C4 etc I find that if I change to "NAR" then the Audio Discription comes on and to make sure I press "audio" and select option that says "English"
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Why not set it OFF as default in image build ??
Loads of people complain abt it.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Auto Language settings......
Change Audio Language 1 to English. (top line)
Set Prefer AC3 to Yes
Set Prefer Audio Stream Stored by Service to No
Press green to save.
That will fix narration on all channels....for 28.2 degrees east alteast.
Last edited by kryton; 19-04-17 at 21:50.
I respect your knowledge, and look to this forum for advice and help, however when the box is set to "Prefer audio track stored by service" to yes e.g. on Spanish SD channels the language will stay on "dos" (English) when you return to channel, if set to no it will revert to Spanish. please see screen shots
I have Audio Language Selection 1 set to English, Prefer Audio Track Stored by Service to No, rest of the settings as per default.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Have you setup as per my settings and Green button to save? Bearing in mind you need to setup as per default then make the adjustments as per my instruction.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Yes, I have and if I set to "no" and pressed green when a channel is changed up or down or box is switched off and on again the language will revert to "Spanish"
When set to yes the language will stay on English at all times. I have seen this mentioned on other threads here and I have changed it to your instructions but the box will always go back to Spanish or whatever the broadcaster's language is. (Of course I am talking about channels on other satellites other than Sly 28) This is what I can’t understand that the box’s instructions are opposite what you are saying?
yes got exactly the same issue and tried all the methods mentionted
althought this has not always been the case just started to happen within the last few months
usually happens after a reboot or software upgrade
glad im not alone on this one then