The bootloader is quick. If you blink you will most likely miss the update. heheOriginally Posted by Tosca
I've flashed the bootloader, but the 'new firmware detected' screen only appears for a split second and doesn't therefore load. The old Apollo 118 and Openvix-5.0.007 load again though.
I've also removed the hard drive completely to get at the front USB cable to the PCB and removed this. The rear USB is soldered to the PCB. I cant find any more cables inside the box to disconnect. Tried re booting and switches off receiver at 49% again.
Have we unfortunately exhausted possible options now?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Posting Permissions
Welcome to Satellite Support Forum .: Home of OpenViX Team:.!
World-of-Satellite enthusiasts Satellite, IPTV, Technology, Audio visual Forum.
Any information provided on this site is not guaranteed in any way. Some articles may discuss topics that are illegal, so this information is provided for educational purposes only, your use of the content, downloads and files, or any part thereof, is made solely at your own risk and responsibility. Viewing Pay TV without a valid subscription is illegal. !! World-of-Satellite.com cannot be held responsible for the content of any information stored or posted on this forum.
Reply With Quote