Hi
This is no longer working on build OpenViX 4.2.021 (2016-12-20)
Any ideas
Hi
This is no longer working on build OpenViX 4.2.021 (2016-12-20)
Any ideas
Just a simple restart of the receiver can correct this "most times".
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Tried that mate
Anyone any ideas on how to debug this problem ?
Some debug below
<101577.058> [eInputDeviceInit] 1 18f 1
<101577.060> [InfoBarGenerics] KEY: 399 GREEN
<101577.397> [eInputDeviceInit] 0 18f 1
<101577.398> [InfoBarGenerics] KEY: 399 GREEN
<101577.400> [ActionMap] ColorActions green
<101577.642> [OnlineVersionCheck][kernelMismatch] no kernel mismatch found
<101577.649> [Skin] processing screen PluginDownloadBrowser:
<101577.694> [OnlineVersionCheck] Checking feeds state
<101577.787> [OnlineVersionCheck] PASSED: stable
<101577.789> [OnlineVersionCheck] Check already in progress
<101577.791> [OnlineVersionCheck] Checking feeds state
<101577.861> [OnlineVersionCheck] PASSED: stable
<101577.863> [OnlineVersionCheck] Check already in progress
<101577.867> [Skin] processing screen SimpleSummary:
<101589.925> [SoftcamManager] mgcamd.1.38 already running
<101589.930> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
Thanks
Last edited by dbrmik; 06-02-17 at 22:00. Reason: debug
All you need to do is A/ make a backup of your settings etc by doing Blue button > ViX > Backup manager > Green button to save settings. Then B/ exit one > Image Manager > Yellow button > Highlight the latest image, in this case should be 4.2.029 & Green button to download. After a few press the Red button to close the window, highlight the image you have just downloaded and press the Blue button to restore and say Yes when prompted. After the Ofgwrite flashing has been completed and the STB has rebooted you will be at the FIW (First Install Wizard), just go through the first initial setup bits and you will be asked if you wish to restore settings and then restore plugins, just say Yes to both.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
dbrmik (06-02-17)
Issue this command in Putty. Post back the result. Guide to Putty in signature if you need it.
Code:opkg update
dbrmik (06-02-17)
Thanks Andy
I've not upgraded the kernel before, i'll give it a whirl when the missus allows me access to the tv
Last edited by dbrmik; 06-02-17 at 22:09. Reason: spelling
Downloading http://www.openvix.co.uk/feeds/openv...ty/Packages.gz.
Updated source 'openvix-3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openv...ll/Packages.gz.
Updated source 'openvix-all'.
Downloading http://www.openvix.co.uk/feeds/openv...el/Packages.gz.
Updated source 'openvix-mips32el'.
Downloading http://picons.eu/feed/Packages.gz.
wget: error getting response: Connection reset by peer
Downloading http://www.openvix.co.uk/feeds/openv...se/Packages.gz.
Updated source 'openvix-vusolose'.
Downloading http://www.openvix.co.uk/feeds/openv...ty/Packages.gz.
Updated source 'openvix-vusolose_3rdparty'.
Collected errors:
* opkg_download_backend: Failed to download http://picons.eu/feed/Packages.gz, wget returned 1.
Uninstall Ocram's picon feeds then restart
Andy_Hazza (07-02-17),dbrmik (06-02-17)
Thanks Abu, thats fixed it, much appreciated