Ill try it again tonight
Ill try it again tonight
post30 from spanner04
i also have an edison coming back to me with boot issue and will need to check wifi issues.
Last edited by cactikid; 23-12-16 at 11:46.
I had the same problem and sorted it by re-flashing image 4.2.023 via rear usb. hope this helps.
Ok,guys I've reflashed with the latest image and still no wifi however I have done what Ashley69 suggested and plugged it into a wired connection connect to the internet let it do the online update, then go into wlan settings and connect to the wlan connection it then connects to the wifi remove wired connection restart the box and it holds the wifi connection.
Thanks to all for the help and suggestions hope this is helpful to others with similar issues
If you reflashed with the latest image, why was an online update available/needed, I wonder?
I presume that it will only update if needed I can't remember if anything actually updated or not I'm just saying that's how I got mine to work and it's running fine.
Regarding the box itself first impressions are as others have said it will make a good spare room box but I would suggest spending a bit more money if this was your main box for viewing on. The reason I say this is I find the channel changing slow but other than that it works as expected.
Have you tried updating by downloading update 4.2023 from WOS web site and unzipping file and then copy to USB stick. switch off box plug in USB stick to rear of receiver, then switch on box, read message on screen "hold down OK button for 10 seconds" this should re-flash box with updated image.
This worked for me got and my WiFi working again.
Sent from my iPad using Tapatalk
Hi Baz it took me 2 days to get the wifi working I'm not about to start changing anything for the moment lol as we all know time will pass and the memory of this will fade when it does I'll try a different image
is it not press ok button within 10 secs to get the image to flash,once pressed within 10 secs you see things move.
From my vast flashing experience the receiver boots straight away once the welcome screen shows on the front panel, but as others have said if not press the ok button on the remote for 10 seconds