Mgcamd works on solo4k and for someone new to the box the easy way is to install a back up image with it all ready working. Seems to be working ok on openblackhole.
lol. Using a backup of an image already done. Some peeps just don't want to learn.
Sent from my iPhone using Tapatalk.
Last edited by Andy_Hazza; 11-11-16 at 20:34.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Oh i'm all for setting up images from scratch but oscam can be a bit of a pain especially if someone is new to these box's. It was just my opinion that the quick way to get up and running is to install a back up image and then you can progress from there. Everyone to their own though.
Clabs (12-11-16)
So is the Oscam settings the same on solo 2 as solo 4k?
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
Yeah it is.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
duoduo (12-11-16)
Setting etc are the same just build is gor arm ala software that's different for Windows and MAC but do the same thing
Sent from my SM-N9005 using Tapatalk
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
In the Vu+ Solo 4K feeds for example you would only have access to the ARM based Oscam builds so no danger of installing the wrong one(s).
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
As I said had it sorted and it's not difficult after you get told what to do.
-Download oscam from feeds
-Get the 4 files needed (google it) cccam to oscam converter is needed for one of them.
-FTP all the 4 files to etc/tuxbox/config folder
-stop all cams, start oscam
Hope it helps.
I'm good with Oscam dude, just testing things before purchasing a 4k receiver. Thanks for the info though
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
Hi Andy Hope this doesn't upset too much but I've been trying to get into OScam and keep hitting a brick wall!!! I'm totally confused with all this modern computer stuff and have screwed up so many Dreamboxes with the fatal "No CA error" (managed to get some of them working) that we are frightened to "trial and error" for fear of not having our favourite/expensive boxes not working. What I fined very strange is that you can now download all these Cams from the official web sites but when you try to get them to work you hit this "not allowed to talk about" problem - we are not all computer buffs and can do programming I'm afraid!!!
These comments are not sent to upset anyone but please mods you have to give us newbies/total idiots some slack and help or not make them available to us in the first place!!!!?
Great site with very many thanks from all - happy Xmas and New Year to ALL
The softcams are there to enable you to use your valid viewing card. You can own a valid viewing card for a subscription, but the cam can be locked to a particular device, the softcam allows you to use your valid subscription on a receiver of your choice.
Before we get all the snide yeah i bet no one has a valid subscription, you would be surprised how many do especially our European cousins and that is all the support you will get on this site.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
BestDecoder (27-12-16)
As long as you don't deviate into cardsharing or line talk you will be OK as long as you stick to using your own card.
Sent from my SM-N9005 using Tapatalk
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
BestDecoder (27-12-16)