I tryed to flash it but nothing comes up in the front lcd im thinking its an internal problem any have the same problem or know of a fix?
Sent from my SM-G900F using Tapatalk
I tryed to flash it but nothing comes up in the front lcd im thinking its an internal problem any have the same problem or know of a fix?
Sent from my SM-G900F using Tapatalk
If the latest ViX will not flash or recognise it does point to a clone. Have you tried flashing with BH? You have formatted a usb flash drive to fat32 and extracted the zipped file to the root of the usb? Try a different usb also.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Reason I say try flashing with BH is because that image works on Clone receivers.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
You didn't actually say where you bought it from, no like like just spell it out.
If it is New, then send it back.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Im actually try to repair it for someone he told me it was genuine but i wanted to make sure i tryed using openvix but notting comes up in the lcd absolutely notting all that happens is the blue light comes on do you still think im using the wrong Image iv done a low level format and formated to fat32 and extracted the file from the zip..
Reading on google there seems to be alot of problems it the flash chip (if that is the right name)
Or is that just clones?
Sent from my SM-G900F using Tapatalk
I've never come across any issues with a genuine receiver.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Ill have to try BH but would the box not show something on the lcd when you turn it on? Boot,booting etc
Sent from my SM-G900F using Tapatalk
Eh???????
Your first post said you just purchased it.
Your last post says your trying to repair it for a friend.
So which one is it.
Stinks of a clone to me.
Anyone got a solution please?
Sent from my SM-G900F using Tapatalk
Can you not check by using the serial number?
How would i do that?
Sent from my SM-G900F using Tapatalk
email vu+ and ask to confirm the serial number, that's on back of box. good luck
PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS