I have recently updated my Xp1000max to 4.2.006 without realising this box is not supported anymore and the feed have been disabled.
is there any way to download the network/samba plugin.
I have recently updated my Xp1000max to 4.2.006 without realising this box is not supported anymore and the feed have been disabled.
is there any way to download the network/samba plugin.
No as the feeds where they were housed has now been deleted. You could get them from another image.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
I have a solo2 but not sure which files to copy over or if it an ipk where its located
Why are Vix still building images for boxes they no longer support?
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Well that's quite pedantic as they where built to 4.2 006 which is a very recent build, why host the file on openvix.co... if you can't then access plugin feeds to set them up, surely the images need pulling as well.
P.s. I would say not being able to add NFS or samba support would render the images useless for most users...
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Andy_Hazza (10-10-16)
Doesnt need to be on the feeds.
Just need a way to install samba server. Any idea where i can get the ipk.
I have a solo2 with samba installed and acces to feeds. Can it be copied over from solo2
So nobody has any idea how to install samba server without feeds.
any guesses?
GITHUB?
If a box with feeds is available, one can download an ipk on that box. In telnet give the command
The ipk will be downloaded to /home/rootCode:opkg download <plugin name>
If you're not sure about the exact <plugin name> you can look at what's installed via the telnet command
Be aware that not all packages downloaded this way can be used on an other box type; sometime they (or parts of it) are hardware specific.Code:opkg list-installed
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Thanks rob
I have a solo2
Its seems like for the samba server there are quite a feww packages.
I have identified and downloaded the following
packagegroup-base-smbfs
packagegroup-base-smbfs-server
samba-base
The first two seem to be vusolo2 specific and wont install on xp1000max
Stuck again