Overscan Issues On Samsung Smart TV?

[champs4life]

I have a Samsung Tv, it is the only Samsung i have ever owned and i don't have any problems with it...
It is obvious to me that the guy has set his enigma 2 box up whilst the tv is in overscan
He has then turned over scan off 'on that input' by enabling screen fit which is correct
He then has black bars around his screen, which on some channels may also be correct
now he needs to either re-adjust his screen size settings on his enigma 2 box and or do this which is clearly stated in the manual for his TV

x Settings can be adjusted and stored for each
external device connected to an input on the TV.

x After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.

x If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.

So I was supposed to have the TV set to screenfit and then setup my enigma 2 box?

Will that have stopped the issues I am having?

So I have to reflash again?

But what I am saying is when I had screen fit enabled it had big black borders showing which in turn made the picture look small surely this isnt right. To add to that alot of channels give a wobbly type picture it doesnt look smooth compared to before.