Auto wide is "supposed to" show picture as delivered from the input source so 16:9 as 16:9 and 4:3 as 4:3 .
So it shouldn,t do anything to it
I am sure with a bit of tweaking everything will be fine just ignore my "love of Samsung" rants
Auto wide is "supposed to" show picture as delivered from the input source so 16:9 as 16:9 and 4:3 as 4:3 .
So it shouldn,t do anything to it
I am sure with a bit of tweaking everything will be fine just ignore my "love of Samsung" rants
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
champs4life (03-10-16)
I hear what your saying mate, i hate my galaxy s7 im stuck with lol, but i just dont see how its possable to be the tv at fault when earlier versions of vix run perfectly, in my case anyway as you know.
Not sure about the over scan issues the OP is having unless store demo mode is enabled like mine was....but he has noticed a big loss in picture quality too after upgrading.
What box do you own @champs4life?
Tweaking indeed helps in earlier versions but no matter what i try in 4.2 i just cant get a decent picture.
For example in 4.1 using the openvix red-HD skin i have to set video output to 720p otherwise i get heavy jagged lines, ok so that could be a skin fault...but in 3.2 i can leave video output at 1080p and the skin works fine.
Last edited by kryton; 03-10-16 at 20:53.
champs4life (03-10-16)
Isnt auto wide still technically overscan on?
I have tried that setting but menu seems cut off which parts the picture would be cut off.
This has taken so much energy out of me I have no idea what to do.
I cant turn overscan off and if I turn it just comes back on. Then when turning it off it just looks all weird.
Why is this so complicated and so problematic.
I have a TM Nano 3T
The quality of SD and especially HD isnt as sharp and crisp compared to before updating the latest image.
Could the skin I have be an issue?
Whether its the image or even TV/receiver at fault I have no idea.
I hate anything technical/advanced as I stress myself out which in turn never solves the issue.
So I think I am just going to give up and accept 16:9 with overscan on and loss of picture quality. Dont know how much is cropped with overscan but whatever now.
Ive only noticed the problem in 4.1 with the red-HD skin, all other skins work fine, but in 4.2 no matter what you do the picture problems remain the same.
If you have changed your skin from the default skin its no harm switching back to see if it helps.
As for your overscan issues did you check your tv users settings for user mode? Its under support in my tv menus.
Last edited by kryton; 03-10-16 at 22:52.
20161003_225246.jpg
Its here on my tv, not sure if all sammy tvs have the same setting.
But it was giving me the same symptons.
I use screenfit for my pc, when playing games it was switching back to 16:9 on its own which became annoying because half the screen went missing .
@twol the model no of the TV is ue40c6500
I had made a mistake I changed the setting to wide zoom, it doesnt allow me to change to auto wide.
Something has occurred to me. On the old image I had the old settings (16:9) and unlike now I never had menus or anything cutting off. So I am completely lost as what has happened. Part of me thinks its the image that is the problem. One thing is for sure I have not had anywhere near the problems I have with the with the picture, settings etc on the old image.
If it's any consolation I've had exactly the same issue with an old (non smart) Samsung Tv and VU+ Solo2. Every time I switch off the TV and Sat box, the TV reverts back to an overscan mode (16x9 - I think). It's quite frustrating. I'm not at the TV right now so I don't know the model number. Also, I've noticed this issue for well over a year on older Vix revisions, but I don't think its anything to do with that.
kryton (03-10-16)
I have a Samsung Tv, it is the only Samsung i have ever owned and i don't have any problems with it...
It is obvious to me that the guy has set his enigma 2 box up whilst the tv is in overscan
He has then turned over scan off 'on that input' by enabling screen fit which is correct
He then has black bars around his screen, which on some channels may also be correct
now he needs to either re-adjust his screen size settings on his enigma 2 box and or do this which is clearly stated in the manual for his TV
x Settings can be adjusted and stored for each
external device connected to an input on the TV.
x After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
x If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
kryton (04-10-16)