Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 13 of 13

Thread: Poor sd quality with vix 4.2

  1. #1

    Title
    Senior Member
    Join Date
    Aug 2015
    Posts
    234
    Thanks
    131
    Thanked 68 Times in 50 Posts

    Poor sd quality with vix 4.2

    So since updating my ET8000 to vix 4.2, SD channel quality is very poor, visible lines on faces, rough jagged lines on cartoons etc.
    I know people are aware of this and Abu made a script to run that kind of sorts the problem, but this script needs to be run each time the receiver comes out of standby. Which gets a bit much after a while.
    Ive now gone back to vix 3.2 to fix the problem.
    Im guessing its a driver issue?
    Ive even read it could be skin related, but im getting the same issue with every skin ive tried, including the default vix-night HD skin

    Does anybody know if this problem will be fixed in future image releases?.
    I would like to beable to update my receiver so i can take advantage of the latest features.
    Last edited by kryton; 20-09-16 at 23:31.

  2. #2
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    ...... what script? really curious

    OK found it ..... but appears to be on 3 different boxes so really drivers?
    Abu comments?
    Last edited by twol; 21-09-16 at 06:55.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  3. #3

    Title
    Senior Member
    Join Date
    Aug 2015
    Posts
    234
    Thanks
    131
    Thanked 68 Times in 50 Posts
    Quote Originally Posted by twol View Post
    ...... what script? really curious

    OK found it ..... but appears to be on 3 different boxes so really drivers?
    Abu comments?
    Do you get the same problem on your ET8500 or 7500 twol?

    As a support forum I was expecting a better response from the image creators to be honest.

    Although im greatful for the time and effort they put into a image.....there must be an answer for this.

    If it is driver related...cant the drivers from vix 3.2 be used?
    Last edited by kryton; 22-09-16 at 00:39.

  4. #4
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    Sorry but I don't see a problem.


    Sent from my iPhone using Tapatalk
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  5. #5

    Title
    Senior Member
    Join Date
    Aug 2015
    Posts
    234
    Thanks
    131
    Thanked 68 Times in 50 Posts
    Quote Originally Posted by Sicilian View Post
    Sorry but I don't see a problem.


    Sent from my iPhone using Tapatalk

    Probably not mate depending what receiver you have.
    But the problem clearly exist's

    http://www.world-of-satellite.com/sh...617#post412617

    http://www.world-of-satellite.com/sh...ent-seems-like

    Could this be something that could be looked into for people who own xtrends or the other receivers mentioned?

    As i say i would like to keep my xtrend upto date if possable.

    Cheers

  6. #6
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by kryton View Post
    Do you get the same problem on your ET8500 or 7500 twol?

    As a support forum I was expecting a better response from the image creators to be honest.

    Although im greatful for the time and effort they put into a image.....there must be an answer for this.

    If it is driver related...cant the drivers from vix 3.2 be used?
    ET8500/7500 - Short answer is No
    Also as the drivers are in the OE-A and therefore are automatically part of all the Images that are part of the OE-A you would have expected this issue to be widely reported, but I have never seen other reports.
    Having said that, I have been a long term user of plasma TV,s where there are some visual defects that are only seen by a small % of people, they are there but most peoples eyes don,t see them, which has lead to a few very agitated people on the AV forums.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  7. The Following User Says Thank You to twol For This Useful Post:

    kryton (22-09-16)

  8. #7
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    There's been no changes in this area or driver updates by Xtrend.


    Sent from my iPhone using Tapatalk
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  9. #8
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Also just to make sure, if you have any picture enhancement features on your TV (likely and on by default), turn them off if possible.
    These largely marketing gimics have caused more issues than solutions
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  10. #9

    Title
    Senior Member
    Join Date
    Aug 2015
    Posts
    234
    Thanks
    131
    Thanked 68 Times in 50 Posts
    Quote Originally Posted by twol View Post
    ET8500/7500 - Short answer is No
    Also as the drivers are in the OE-A and therefore are automatically part of all the Images that are part of the OE-A you would have expected this issue to be widely reported, but I have never seen other reports.
    Having said that, I have been a long term user of plasma TV,s where there are some visual defects that are only seen by a small % of people, they are there but most peoples eyes don,t see them, which has lead to a few very agitated people on the AV forums.
    To be honest mate i hadnt ruled out my tv being at fault at first, but then i noticed the same issue when streaming to my tablet and mobile.

    Thats when i did a search here and stumbled across the 2 threads in my last post.
    Which is the exact same problem im getting. Solid vertical lines mostly seen on peoples noses...hence Abu's script "linesonnose"

    Im no expert but running the script does solve it, which to me suggests its altering something within the image? Thats why i assumed it was a bug...that and the fact my box runs sweet as a nut on 3.2.
    Ive tried adding the script to the cron timer. But you can only get it to run hourly....so if you come out of standby sometimes you have to wait for the timer to do its thing.... ive tried manually setting the timer to run every 10 minutes using */10 * * * * but it doesnt seem to like this and the script doesnt run.

    Would be great if this could be sorted.

    Thanks for the replys guys.
    Last edited by kryton; 22-09-16 at 08:31.

  11. #10
    abu baniaz's Avatar
    Title
    Moderator
    Join Date
    Sep 2010
    Location
    East London
    Posts
    23,541
    Thanks
    6,517
    Thanked 9,224 Times in 6,287 Posts
    It is not my script, you must credit @aido for it

  12. The Following User Says Thank You to abu baniaz For This Useful Post:

    aido (22-09-16)

  13. #11

    Title
    Senior Member
    Join Date
    Mar 2014
    Posts
    290
    Thanks
    100
    Thanked 73 Times in 59 Posts
    The script was all yours mate, I just found the command which seemed to sort the issue out

    I swapped over to an LG E6 now and the picture quality that comes out of the LX3 can be absolutely incredible

  14. #12

    Title
    Senior Member
    Join Date
    Aug 2015
    Posts
    234
    Thanks
    131
    Thanked 68 Times in 50 Posts
    Sorry for the misunderstanding.
    The thread showed aido suggested a script be made and then Abu posted it.
    There was no real mention to who the creator was.

    But still it works as a temporary fix, would be nice to see a more permanent fix so i could update my box.
    Last edited by kryton; 22-09-16 at 09:24.

  15. #13

    Title
    Junior Member
    Join Date
    Aug 2016
    Posts
    21
    Thanks
    4
    Thanked 5 Times in 3 Posts
    Hi kryton, I'm the thread starter for one of the related threads you found.

    I first noticed this issue with Vix 4.1. Was hoping 4.2 would sort it, but no joy. Next step, 3.2 downgrade

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.