Hi I've just flashed my solo 2 with latest vix clean flash and install and it's all running ok but channel list is slow to load and switch between the different groups well annoying any ideas anyone ?
Cheers for any help
Hi I've just flashed my solo 2 with latest vix clean flash and install and it's all running ok but channel list is slow to load and switch between the different groups well annoying any ideas anyone ?
Cheers for any help
Batteries?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Solo2 should not be run with a swap file.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Not the batteries new all the rest of the menus running ok just the channel sides is died slow I've always ran a swop file on it with all the older versions with no trouble
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
How is you channel list made up? Do you have picons installed? If so where?
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
I have the very same issue on My DUO2 after today's on-line update,
No Swap enabled
1080 Confluence Skin (same results with Default Skin)
Magic HD
picons are stored on a usb stick as advised.
Vu+UNO 4K SE [OE-Alliance-4.4 Firmware 5.4-010-Build Oscam-r11693-798][with keys]
Vu+DUO 2 [OE-Alliance-4.4 Firmware 5.4-003-Build Oscam-r11572-798][with keys]
Vu+SOLO 2 [OE-Alliance-4.3 Firmware 5.3-039-Build MGcamd]
Vu+SOLO SE [OE-Alliance-4.4 Firmware 5.4-003-Build MGcamd]
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
^^COMPASS^^ (08-09-16)
Tuner A: Vuplus DVB-S NIM(AVL6222) (DVB-S2) 28.2e
Tuner B: Vuplus DVB-S NIM(AVL6222) (DVB-S2) 28.2e
Tuner C: Vuplus DVB-S NIM(AVL2108) (DVB-S2) Motor
Full motor list from isettings from plugin feeds vhannibal motor 68e - 45w
AutoBouquetsMaker for 28.2e Tyne Custom
Full EPG Guide is unaffected
Vu+UNO 4K SE [OE-Alliance-4.4 Firmware 5.4-010-Build Oscam-r11693-798][with keys]
Vu+DUO 2 [OE-Alliance-4.4 Firmware 5.4-003-Build Oscam-r11572-798][with keys]
Vu+SOLO 2 [OE-Alliance-4.3 Firmware 5.3-039-Build MGcamd]
Vu+SOLO SE [OE-Alliance-4.4 Firmware 5.4-003-Build MGcamd]
Updated a couple of boxes today, no issues. Channel lists made form ABM. I'll try motor now.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
^^COMPASS^^ (08-09-16)
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
I have Just updated to the latest Build on my Solose v1 channel list is provided by AutoBouquetsMaker for 28.2e Tyne Custom
I have taken a couple of video clips using my ipad,
one of Duo2 & the other of Solose zipped up & attached
There is a very slight delay in solose unlike the Duo2 which is rather more affected.
Vu+UNO 4K SE [OE-Alliance-4.4 Firmware 5.4-010-Build Oscam-r11693-798][with keys]
Vu+DUO 2 [OE-Alliance-4.4 Firmware 5.4-003-Build Oscam-r11572-798][with keys]
Vu+SOLO 2 [OE-Alliance-4.3 Firmware 5.3-039-Build MGcamd]
Vu+SOLO SE [OE-Alliance-4.4 Firmware 5.4-003-Build MGcamd]
I'm running ciefpsettings motor with abm at the top
It's not the switch over time between channels that's still quick it's the menu load time with both abm and ciefpsettings
I've switched swop file off I'm running picons on usb stick
^^COMPASS^^ (08-09-16)
Same issue here on my miraclebox box ultra and edision os since updating to 4.2.003. Only on the satellite side there's a delay but virgin is ok.
I manually scan and make up my own channel list.
Picons on flash
Sent from my iPhone using Tapatalk
Octagon SF4008 (1tb hdd - Openvix 5.1) Edision Combo (8gb USB - Openvix 5.1)
just updated my solo 4k from 4.2.002 to 4.2.003 and when I push up on the remote to go through channels there are none there for about 15ses and then when they appear it takes ages to scroll through them and if I try to download any plugins it takes ages or just stops
gone back to 4.2.002 and all is fine