Thats better.
Sent from my iPhone using Tapatalk
Thats better.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
nibbenjamin (13-04-16)
Cool - will let you know how it goes! Thanks again!
As a test to see if it works you could always change the scheduled time to 19:20 and then save n put the box into standby n then see if it works. Or you can just leave as it is and see what happens in the morning.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Hahaha I just tried that and it didn't work!
It's very strange cos my VU Duo works set up like this no problem at all!
Hhhmmmm. Strange. What happens? With your Vu+ Duo I'm guessing you have a swap file enabled?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Does Crossepg work in "download hourly in standby" mode?
would this setup be ok running on a vu solo2 in the uk
As I stated above it works fine on my Vu Duo but my Edision Mini still won't do it!
Oh well manual download daily it it then!
1. How many satellite tuners do you have?
2. How many signal wires do you have connected to the receiver?
3. What is eact tuner confiured as? (answer separately for each tuner please)
4. Are all the signal wires direct from the LNB, i.e no splitters etc used.
5. Are you using AutoBouquetsMaker or AutoBouquets 28.2?
The answers are in the quote mate!
Only just noticed that the last one was outside the quote. Difficult to highlight them in tapatalk
Last edited by nibbenjamin; 15-04-16 at 08:25.
abu baniaz (15-04-16),judge (15-04-16)