Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: VU+ SE V1,V2 Higher symbol Rate Transponders Problem

  1. #1
    mianabid

    VU+ SE V1,V2 Higher symbol Rate Transponders Problem

    I remember the time when i first time bought vu+ UNO and it was not scanning higher symbol rate channels on Asiasat 100.5 and VU+ provided upgrade to resolve the issue

    I am facing the same problem in my new VU+ SE V1 V2 DOU2 ZERO receivers which is not tuning following TP,s which has 44995 symbol rate while the TP which has 30000 SR has no issue



    Team please provide solution ,Very annoyed that same issue is not tested before launching the product in market

    Satellite ST2 88 East Videocon Package

    11164V449952/3DVB-S28PSK
    11164H449952/3DVB-S28PSK
    11483V449952/3DVB-S28PSK
    11483H449953/4DVB-S28PSK
    11546V449953/4DVB-S28PSK
    11546H449953/4DVB-S28PSK
    11609V439782/3DVB-S28PSK
    11609H449952/3DVB-S28PSK
    11672V449952/3DVB-S28PSK
    11672H449953/4DVB-S28PSK

    11050 V 30000 is Ok


    P.S. I have tried all images including VU+ original



  2. #2
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    It's not down to the vix to provide a solution for this, report it to vu+!


    Sent from my iPhone using Tapatalk
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  3. #3
    mianabid
    Quote Originally Posted by Sicilian View Post
    It's not down to the vix to provide a solution for this, report it to vu+!


    Sent from my iPhone using Tapatalk
    ok thanks already reported

  4. #4
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    I seem to remember when Xtrend had a similar issue, it was a chip replacement
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  5. #5
    mianabid
    Quote Originally Posted by twol View Post
    I seem to remember when Xtrend had a similar issue, it was a chip replacement

    xtrend which model ??? which satellite

  6. #6
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by mianabid View Post
    xtrend which model ??? which satellite
    I am talking a long time ago on the ET9200
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  7. #7
    mianabid
    do you think its processor or hardware fault or drivers fault

  8. #8
    twol's Avatar
    Title
    Moderator
    Join Date
    Apr 2012
    Posts
    8,618
    Thanks
    1,009
    Thanked 2,964 Times in 2,305 Posts
    Quote Originally Posted by mianabid View Post
    do you think its processor or hardware fault or drivers fault
    Well on the Xtrend if I remember correctly, they had to change a component so it could access the higher symbol rates.
    Gigablue Quad 4K & UE 4K
    .........FBC Tuners:
    ------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
    ------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
    .......................
    Vu+ Uno4KSE, Dreambox dm900
    AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
    Zgemma H9 C/S into Giga4K

  9. #9
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    Quote Originally Posted by mianabid View Post
    do you think its processor or hardware fault or drivers fault
    Driver issue.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  10. #10
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,666
    Thanks
    23,604
    Thanked 26,081 Times in 7,641 Posts
    Quote Originally Posted by twol View Post
    Well on the Xtrend if I remember correctly, they had to change a component so it could access the higher symbol rates.
    ET9000, Tuner B issue.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  11. The Following User Says Thank You to Sicilian For This Useful Post:

    twol (17-03-16)

  12. #11
    mianabid
    Friends from Europe who can not get this satellite can test on ABS-2 75 East Russia Beam Transponder 12093 V DVB-S2/8PSK
    MPEG-4 45000 2/3 MTS TV package same problem signal being locked but channels not being stored

  13. #12
    mianabid
    no reply from vu+

    looks like these receivers comes with faulty hardware not software issue

  14. #13
    mianabid
    VU+ team is in mute mode

    I guess they gave it up

    Even chines clone boxes fixed the problem

    VU+ has poor technical team or hardware

  15. #14
    Huevos's Avatar
    Title
    Administrator
    Join Date
    Jun 2010
    Location
    38.5N, 0.5W
    Posts
    13,945
    Thanks
    2,062
    Thanked 5,145 Times in 3,395 Posts
    Quote Originally Posted by mianabid View Post
    Friends from Europe who can not get this satellite can test on ABS-2 75 East Russia Beam Transponder 12093 V DVB-S2/8PSK
    MPEG-4 45000 2/3 MTS TV package same problem signal being locked but channels not being stored
    My guess is dodgy LNB or not enough dish. Those tuners don't have any problem with 44100 SR on 27W.
    Help keep OpenViX servers online.Please donate!

  16. The Following User Says Thank You to Huevos For This Useful Post:

    Sicilian (12-04-16)

  17. #15
    mianabid
    Quote Originally Posted by Huevos View Post
    My guess is dodgy LNB or not enough dish. Those tuners don't have any problem with 44100 SR on 27W.
    Its the problem with everyone not only with me

    and not everyone have faulty LNB or set up

    Its hardware or software issue

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.