Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Sorry I've asked this before and didn't get an answer, is there a good to setting up fallback tuner, it is something i have never been able to get working, whilst Remote stream channel converter is quite easy to configure.
It just works out-of-the box. Fill in the details (IP & port) and activate.
The FB-tuner will be used when local tuners aren't available (either because they are busy or absent at all).
Just this morning I set FB on all my boxes (on ViX 3.2-016 as well as PLi and XTA) to use FB and they all work fine.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
There seems to be lots lost in translation in this thread, i'm going to assume English isn't everyone's first language. Anyway I was referring to the hard drive path name shown in the recordings menu - sorry I was ranting about something completely unrelated to the thread.
Regardless, you're right - as Id established about 5 posts ago, using the fallback tuner is the way to go for me and so far thats working brilliantly - i'm just going to have a little linux box sync the 2nd box to the server so I can benefit from the auto ABM updates. Cheers!
I have always used RCSC and necer had problems.The channel list is one where I adapt the names of favorites with DBE.Is there somewhere a manual how to setup fallback tuner ? Do you must set it up on slave box or needs something on master box also ?
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
Just add the IP-address in 'customise' and activate.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
on slavebox then ? Nothing to do on masterbox ? Will the RCSC channellist still work or do we need to upload same list as on masterbox ?
VU+ DUO2 quad tuner with HDD 1 TB + Latest Openvix and VU+ DUO2 FB tuner + Octagon SF8008 FB tuner
Triax 88 cm rotor single LNB 30 E- 40 W
1 Gibertini 1.00 m fixed - 3 quad LNB 19E-23.5E-28.2E
What should the port be?
No port, just enter the IP - not sure why everyones so confused by the fallback receiver option here, its one of the most straight forward settings in OpenVix! It wins for me as I can just manage my bouquets easily and quickly as has been established in this thread - both method works flawlessly in terms of actually displaying the channel on your box, it just depends, if like me, you'd prefer not to have the bouquet names with the server box name added to them (and not have to edit them each time)
I got it to work and I did need to enter the port which was 8001, this was the bit that wasn't getting set correctly, I had tried 80, 8080 but it needs 8001.
Now if only ABM could use remote fallback if all my tuners are occupied....
I want satellite box
Sent from my SM-G7102 using Tapatalk
When I used RCSC on my 2nd box (client) to watch cable channels from the 1st box (server), it would not allow me to record. It would show as recording but when I would try to play it, it would look like it is recording. but later when i would try to play, it would just show the live feed of that channel rather than what I recorded and then the box would crash. Or it would be completely jiitterly and unwatchable, even standard free-to-air bbc1. Plus AutoTimer refused to add recordings to the Timer if it was set from a Remote Bouquet.
How do i record on RCSC?
also, what is "fall back tuner" and its purpose?
Last edited by zino; 06-11-15 at 05:16.
Please, try again with RCSC with build 021.
Fallback tuner allows you to stream a service from another receiver if it ccurrently is not possible on the local box.