That is exactly what I am saying. You need signal lock before you start to adjust. Before that you are just working blind.Originally Posted by djz46
Well you can use a meter if you want. I suppose most would.
VU+ DUO2 Always Current Vix Build Gibertini 1.2m Motorised
Can you link me to something better?
Like a pole and brackets for a 1M dish i have just got the Supreme motor so just need bracket iv searched around to no avail
Last edited by YzMENTALzY; 09-08-15 at 19:18.
T&K Brackets here, speak to Tony hes a great chap. For some reason it won't let me post the link (remove spaces)
[Mod] Link removed. Please read the forum rules.
5. No links are to be posted to other commercial satellite retailers other than our site sponsors.
Last edited by Huevos; 09-08-15 at 19:36.
VU+ DUO2 Always Current Vix Build Gibertini 1.2m Motorised
YzMENTALzY (10-08-15)
Just go to any tv aerial shop and they should have them find loads in any area with yell.com or even ebay depending how quick you want dish up
Just remember to buy a decent pole to go between thats the right diameter think it should be 2" minimum really
Last edited by jasper1974; 09-08-15 at 23:56.
YzMENTALzY (10-08-15)
Can you PM link please would be helpful... i tried ebay no luck tbh just normal L shaped crap
just go to eBay and in the search type " t and k bracket pole " then you will find both the T&K Bracket and the pole you need i did post a link but it was taken off even though it followed the forum rules as the seller only sells aerial and dish accessories and isn't a satellite retailer
Cant find 2inch pole tbh
Normally stated as a 50mm pole ( depends if you work in mm or inches ) if you look on ebay with search i recommended above you will see on the listing the 12" 18" and 24" t&K brackets ( they sell a 32mm pole too thin in my opinion) and also listing says they can do steel poles that are 2" just have to message them.
Saying that theres hundreds of 50mm steel poles on eBay if you do a search
just search for "50mm Galvanised Steel Tube" lot cheaper than the person selling the T&K Brackets
I have t & k brackets with a 6" length of scaffold pole Technomate steel cog motor and a Tirax 110 cm dish its very sturdy .
Yes scaffolding pole have a look around your area take an adjustable spanner with you
i had t and k brackets off the bay
U guys are life savers il post pics up when im done to show how it went thanks again
Found a 48.3mm pole would that be good enough or does it have to be exactly 2inch? 48mm is just under 2inch to be fair?
Last edited by YzMENTALzY; 11-08-15 at 01:39.
Also will 900mm length be enough if i want dish to be above the guttering so it can turn freely without hitting the wall?
Reply With Quote
